Physical-mechanical properties of surface finish on aspen poplar wood
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 98, Issue
Abstract
Physical-mechanical properties of surface finish on aspen poplar wood. The article deals with the hardness of transparent coatings and the impact resistance of the coatings on aspen poplar wood. Transparent finishes, the thickness of coating, and the method of machining of aspen poplar wood were monitored. Aspen poplar samples were machined by one of five different ways of surface machining (milling, sanding, and three ways of pressing). Two types of transparent finish (water-based) were used to make coatings. The coatings were created in three various thicknesses. The hardness of transparent finish was tested by the pencil test and the impact resistance of the coating was measured. The evaluation of the results has shown that the properties of the surface finish were influenced by the type of finish, the thickness of coating, and by the methods of wood machining.
Authors and Affiliations
GABRIELA SLABEJOVÁ, MÁRIA ŚMIDRIAKOVÁ, MIROSLAV MORINGA
Keywords
Related Articles
- EP ID EP339260
- DOI -
- Views 64
- Downloads 0
Analysis of explosive parameters of jatoba dust in wood and furniture industry
Analysis of explosive parameters of jatoba dust in wood and furniture industry. In the article are presented research results of the maximum explosion pressure, maximum rate of explosion pressure rise, low explosion limi...
An assessment of the technological parameters of processing medium-size raw material for industrial use
An assessment of the technological parameters of processing medium-size raw material for industrial use. The shortage of large-size raw material and its high prices are the reason for searching materials with lower cost...
Comparison of papermaking potential of wood and hemp cellulose pulps
Comparison of papermaking potential of wood and hemp cellulose pulps. The use of fibre hemp (Cannabis sativa L.) for pulp and paper dates back more than 2,000 years. This technology disappeared, but we have a significant...
Влияние микроклиматических условий на влажность и размеры некоторых пород древесины используемых в производстве полов.
Влияние микроклиматических условий на влажность и размеры некоторых пород древесины используемых в производстве полов. В исследованиях определено как изменяется температура и относительная влажность воздуха в жилом помещ...
Modification of the surfaces of wood cutting tools using CO2 laser - SEM analysis
Modification of the surfaces of wood cutting tools using CO2 laser - SEM analysis. SEM analysis of the surfaces of wood cutting tools modified by CO2 laser is presented. The aim of the conducted research was to study the...