Polyethersulfone membrane modification with TiO2 nanoparticles by “layer-by-layer” method

Abstract

The aim of this study is to show the results of modification of polyethersulfone membranes with photocatalytic nanoparticles TiO2. Titanium(IV) oxide was used because of its non-toxicity and cheapness, moreover, its immobilization on the surface allows simultaneous separation and decomposition of pollutants. TiO2 nanoparticles were immobilized on the surface of polyethersulfone membranes by “layer-by-layer” method with natural polysaccharides as polyanions and polyethylenimine as polycation. Membrane modification was confirmed by zeta-potential dependence on pH. Membranes modified with TiO2 nanoparticles had an isoelectric point in the pH range of 5.2–5.8 which corresponds to pI of titanium oxide(IV). Photocatalytic properties of modified membranes were analyzed in a model reaction of Rhodamine G decomposition. Experimental data showed that the decomposition of Rhodamine G occurred at the reaction of a pseudo-first order. Low photocatalytic activity (dye half-life (t1/2=ln2/k) was only 17–40 hours) in the decomposition of rhodamine G is caused by a small amount of titanium oxide nanoparticles adsorbed on the surface. However, it is possible to assume that photocatalysis will continue in membranous layer, providing self-cleaning membrane. Membranes exhibited high self-cleaning ability during bovine serum albumin and milk nanofiltration. The presented results show that polyethersulfone membranes gain antifouling and self-cleaning properties after modification with polyelectrolyte complexes and titanium(IV) oxide.

Authors and Affiliations

I. S. Kolesnyk, O. Ya. Dzhodzhyk, V. V. Mukoida, S. M. Tsaryk, A. F. Burban

Keywords

Related Articles

Сушка краплин водних суспензій багатошарових вуглецевих нанотрубок в присутності катіонної поверхнево-активної речовини ЦТАБ

Досліджено вплив цетилтриметиламоній броміду (ЦТАБ) на сушку краплин водних суспензій багатошарових вуглецевих нанотрубок (НТ) з їх концентрацією в інтервалі Сn=0.005–0.1 %. В залежності від концентрації НТ і ЦТАБ, в про...

Physicochemical aspects of therapeutic effect of enterosorbents (theoretical research)

Active promotion of enterosorbents to the market outruns thorough study of the mechanisms of their therapeutic effect. The consumers and even many specialists have a simplified view of the only role of the enterosorbents...

Investigation of the interaction of caffeic acid with surface of nanosized cerium dioxide by methods of thermodesorption mass-spectrometry and IR-spectroscopy

The study of the thermochemical properties of caffeic acid and its surface complexes is important for the pharmaceutical and food industries, medicine and for development of technologies of heterogeneous catalytic pyroly...

Investigation and selection of initial materials as possible sources for obtaining sorbents

The information about selection of initial materials based on bentonite, brown coal and technical soot for obtaining new sorbents is presented in this article. Obtaining new efficient carbon sorbents based on local Angre...

Синтез, структура і магнітні характеристики однодоменних наночастинок твердих розчинів (Fe1-xNix)Fe2O4

Синтезовано однодоменні наночастинки (НЧ) твердих розчинів (Fe1-xNix)Fe2O4. Досліджено їхню кристалічну структуру, морфологію поверхні і магнітні характеристики методами рентгенофазового аналізу, растрової електронної мі...

Download PDF file
  • EP ID EP251571
  • DOI 10.15407/hftp08.03.310
  • Views 99
  • Downloads 0

How To Cite

I. S. Kolesnyk, O. Ya. Dzhodzhyk, V. V. Mukoida, S. M. Tsaryk, A. F. Burban (2017). Polyethersulfone membrane modification with TiO2 nanoparticles by “layer-by-layer” method. Хімія, фізика та технологія поверхні, 8(3), 310-321. https://europub.co.uk/articles/-A-251571