Prediction of Optimal Torques from Gait Analysis Applying the Machine Learning Concepts
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
With the advancements in engineering and technology and with the advent of the fourth industrial revolution made the solution for complex and dynamic problems easier. Many researchers had incredibly investigated about the problems, which are outcomes of prosthetic leg, attached to a human being especially at working conditions and still the problem pertains till date. This might be one of the crisp reasons which insisted& necessitated to undergo this project. In this project, considering a set of persons aging 19-28 were made to walk on a tread mill. It is a tedious process to take the hip and knee angles physically using various sensors and its very complicated process to generate torque values and finding the optimal torque values for different persons converting physical variables to digital variables. To overcome this problem advanced software’s like Kinovea is employed for measurement of angular cycles for gait analysis and based on these values machine learning algorithm is employed to find the accuracy and better prediction of torques for different disabled persons
Authors and Affiliations
B. Satish Kumar, Y. Kalyan Chakravarthy
Keywords
Related Articles
- EP ID EP655874
- DOI 10.24247/ijmperdaug201969
- Views 97
- Downloads 0
Stepper Motor Actuator for HVAC Blend Door – A Review
duct has the heater core mounted on the evaporator core. The temperature of the air depends on the amount of mixing of the air, which passes through the heating core and then through the evaporator. The passage of air th...
Experimental Investigation on Hardness, Microstructure and Surface Roughness of Maraging Steel Parts Produced by Direct Metal Laser Sintering Technique
Direct metal laser sintering (DMLS) is an additive manufacturing technique used to fabricate metal parts directly from the computer- aided design (CAD) data without any further machining operations. The DMLS technique is...
EXPERIMENTAL INVESTIGATION ON MECHANICAL CHARACTERIZATION OF PAN CARBON
The main factors that derive the use of composites are weight reduction, corrosion resistance, specific strength and stiffness, when compared to traditional materials or conventional materials. Characterization of each c...
Damping Improvement of a Cantilever Beam using Two Patches of Tubes Fluidic Flexible Matrix Composite
Fluidic Flexible Matrix Composite (F2MC) tubes are promising fiber reinforced tubes, they can passively provide damping and vibration absorption. This study focuses on analyzing F2MC tube’s response to add damping to can...
A Review of Machining Characteristics in Mechanical Drilling of Super Alloys
Super alloys are extensively used in the field of aerospace to manufacture aircraft engine components such as casings, rings, seals, fasteners, turbine blades, vanes, discs, shafts, combustors and general engine hardware...