PROBLEMS OF TECHNOLOGICAL TREATMENT OF THE SURFACE LAYER IN THE ASPECT OF THE SCUFFING PERFORMANCE. PART I: THE SCUFFING PROGNOSTICATION
Journal Title: Tribologia - Year 2015, Vol 263, Issue 5
Abstract
The article presents a review of modern knowledge concerning mechanisms of scuffing activation and the evaluation of the level of its application in the prediction of this process. Five basic groups (temperature, debris, energetic, structural and boundary layer durability) of parameters/features were selected that can determine the resistance of the surface layer to this type of catastrophic wear. The analysis of acquired data indicated that models representing the interdependence of individual features of the tribosystem (friction pair materials, the type of the lubricating medium and the regime of its operation, and the environment), which are used to predict the onset of scuffing, can be based on different premises. A topological concept of the surface layer with increased scuffing performance was proposed using this approach. Additionally, a brief terminological analysis of the scuffing definitions was carried out. Some inaccuracies appearing in the scientific works in the context of determining scuffing were indicated.
Authors and Affiliations
Łukasz WOJCIECHOWSKI
Keywords
Related Articles
- EP ID EP256145
- DOI -
- Views 57
- Downloads 0
TRIBOLOGICAL PROPERTIES OF HVOF SPRAYED TUNGSTEN CARBIDE COATINGS MODYFIED BY THE EDM PROCESS
Wear and abrasion are still up-to-date problems in all branches of industry. Although modern technologies permit considerable improvement in the properties of the outer layer, they need to be constantly modified or new s...
WPŁYW TWORZENIA KOMPLEKSÓW POLIMERÓW Z SURFAKTANTAMI NA WYBRANE WŁAŚCIWOŚCI TRIBOLOGICZNE ICH WODNYCH ROZTWORÓW
Jako modelową substancję smarową zaproponowano wodne roztwory alkilosiarczanu sodu (surfaktant) i poliwinylopirolidonu (polimer), których właściwości fizykochemiczne, w tym zdolność do kompleksowania, zostały szeroko opi...
ANALYSIS OF TRIBOLOGICAL PROPERTIES OF SELECTED PTFE-BASED POLYMER COMPOSITES IN A SLIDING INTERACTION WITH ALUMINIUM OXIDE (Al2O3)
The paper presents the microstructure and mechanical and tribological properties of polymer composites based on polytetrafluoroethylene (PTFE) intended for use in friction couples where reciprocating motion is performed,...
THE EFFECT OF THE IONIZING RADIATION ON THE TRIBOLOGICAL PROPERTIES OF THERMOPLASTIC POLYMERS RUBBING AGAINST STEEL
The paper describes the effects of gamma radiation doses on the tribological and mechanical properties of selected thermoplastic polymers: PEEK, PEI, PET, and PA6. Samples of those polymers were irradiated with gamma ray...
EFFECT OF ULTRAVIOLET RADIATION ON THE VISCOSITY OF LUBRICATING OILS
The article presents the study of viscosity changes of samples of mineral base oil, base oil with viscosity additive and engine oil after they have been exposed to UV-C radiation at different time sequences. The research...