PROGNOSTIC MODELS OF TRIBOLOGICAL PROPERTIES OF LUBRICANTS
Journal Title: Tribologia - Year 2014, Vol 253, Issue 1
Abstract
The article presents the ability to prediction of the regression models of the AE and EP additives effect on tribological properties of lubricants. The tribological properties of the elaborated lubricants were evaluated with the use of four-ball apparatus. The tribological parameters: Goz – the limiting load of wear and poz – the limiting pressure of seizure were analyzed. The lubricants elaborated with the use of different oil basis namely: mineral, ester and hydrocarbon were investigated. Based on the research results the regression models were developed and theirs prediction abilities were evaluated.
Authors and Affiliations
Ryszard RUTA, Andrzej BATOR
Keywords
Related Articles
- EP ID EP263725
- DOI -
- Views 38
- Downloads 0
Rozważania o podstawach tribologii. Cz. 9. Tribologia w procesie dydaktycznym w uczelniach wyższych
W artykule zaprezentowano dydaktyczne aspekty tribologii. Przeanalizowano funkcje przedmiotu w programie dydaktycznym. Omówiono różne warianty miejsca tribologii w procesie dydaktycznym. Przedstawione warianty udziału tr...
RELATION BETWEEN SHEAR STRESS AND SHEARING TIME IN SELECTED LUBRICANT COMPOSITIONS
The paper presents the results of studies of the influence of fillers introduced into lubricating greases on changes in values of shear stresses in resulting lubricant compositions. These fillers were powders of graphite...
Badanie wpływu samochodowych i przemysłowych olejów przekładniowych na mikropitting kół zębatych
Celem pracy była ocena wpływu właściwości samochodowych olejów przekładniowych (przeznaczonych do ręcznych skrzyń biegów oraz do tylnych mostów) na przeciwdziałanie mikropittingowi kół zębatych. Badania wykonano za pomoc...
THE INFLUENCE OF THE TYPE OF GREASE ON THE SYNERGY OF ITS COMPOSITION WITH PTFE POWDER AND COPPER POWDER
Studies of the influence of the type of grease on the synergistic effect of its compositions with PTFE powder and of copper during the lubrication of steel sliding pairs working in mixed friction area of were presented....
ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF POLYMERS USED IN ADDITIVE TECHNOLOGIES SLS AND PJM
The paper presents preliminary results of tribological research on materials used in two additive technologies photo-curing polymer resin PJM and selective laser sintering of polyamide powders SLS. A Tribometer T-15 type...