PROPERTIES OF PLASMA AND HVOF SPRAYED COATINGS
Journal Title: Tribologia - Year 2010, Vol 234, Issue 6
Abstract
Nowadays plasma spraying and supersonic spraying processes are widely applied in many branches of industry. This paper presents current achievements in this area and the results of investigations of plasma and supersonic sprayed NiCrBSi/Fe2O3 coatings. It was found that the microstructures of coatings depend on the method of spraying. The tests show that supersonic coating possesses lower porosity and scuffing resistance. The investigations concluded that supersonic sprayed coatings posses higher wear resistance. The increase of the Fe2O3 portion in the composite coating causes a decrease of the wear resistance of coatings.<br/><br/>
Authors and Affiliations
Wojciech Żórawski
EFFECT OF APPLYING FLUSHING FLUID ON LUBRICITY PROPERTIES OF REFRIGERANT COMPRESSOR OILS
There has currently been a dynamic return to applying natural refrigerants such as hydrocarbons. They are substances containing neither fluorine nor chlorine, which contribute to the enlargement of the ozone hole and the...
EVALUATION OF LUBRICATING PROPERTIES OF MIXTURES OF MINERAL OILS WITH REFRIGERANT R600A
Current legal regulations concerning ozone-depleting substances and greenhouse gases result in a dynamic return to the use of natural refrigerants such as hydrocarbons. However, they are gases included in the A3 (combust...
BADANIA PARAMETRÓW TRIBOLOGICZNYCH SKOJARZEŃ MATERIAŁÓW STOSOWANYCH NA ZAWORY, PROWADNICE I GNIAZDA
Przeprowadzono badania własności tribologicznych stopów TiAl, uŜywanych dla zaworów współpracujących z Ŝeliwnymi prowadnicami i gniazdami. Celem badań było uzyskanie wartości współczynnika tarcia dla tych par ciernych i...
THE ANALYSIS OF TRIBOTESTER INFLUENCE ON FRICTION COEFFICIENT ESTIMATION
The article presents the research results of friction coefficient measurements with the use of different tribotesters. Different friction couples materials were investigated. The experiments were carried out on tester T1...
INNOWACYJNA TECHNOLOGIA WYTWARZANIA WARSTW PRZECIWZUŻYCIOWYCH NA NARZĘDZIA DO KUCIA NA ZIMNO
Narzędzia do kucia na zimno poddawane są bardzo dużym obciążeniom ze względu na wysokie naprężenia oraz umocnienie podczas kształtowania. W niniejszym artykule przedstawiono analizę wpływu zmiany powierzchni narzędzi z t...