THE ANALYSIS OF TRIBOTESTER INFLUENCE ON FRICTION COEFFICIENT ESTIMATION
Journal Title: Tribologia - Year 2010, Vol 234, Issue 6
Abstract
The article presents the research results of friction coefficient measurements with the use of different tribotesters. Different friction couples materials were investigated. The experiments were carried out on tester T10 with a vertical (T10V) and horizontal (T10H) position of the friction couple and tester T11 with the axis in a vertical position. The research was planned with the use of the Tagutchi method in order to process parameter determination that enable the research results scatter to be minimised. The analysis presented in the article concern the identification of the tribotester’s influence on the dry friction coefficient in different conditions of the friction process. Based on experimental results, conducted for different materials on different tribotesters, the process parameters of humidity, load, and velocity influence on the measurements of the friction coefficient was also estimated.<br/><br/>
Authors and Affiliations
Magdalena Trzos
Keywords
Related Articles
- EP ID EP517196
- DOI -
- Views 63
- Downloads 0
FAT CELL BURNING DURING HYDRODYNAMIC SWEAT LUBRICATION
This paper presents hydrodynamic lubrication of human skin by the thin layer sweat restricted on the tight fitting sportswear surface during the sport training. The aim of this paper is to determine the influence of the...
Ocena smarności mieszanin estrów metylowych kwasów tłuszczowych otrzymywanych z olejów roślinnych w oleju napędowym
Przedstawione rezultaty badań są częścią programu badawczego, w którym dokonano optymalizacji składu kompozycji oleju napędowego z dodatkami estrów metylowych kwasów tłuszczowych (FAME – Fatty Acid Methyl Esters) otrzyma...
AN ANALYSYS OF WEAR AND MECHANICAL AND TRIBOLOGICAL PROPERTIES OF HIGH-MANGANESE CAST STEEL HARDENED BY DIFFERENT METHODS
Properties of high manganese austenitic cast steel are not satisfactory; therefore, this material should be hardened. Currently, the commonly used method of hardening does not allow eliminating problems related to premat...
TRIBOLOGICAL PROPERTIES OF HYBRID LAYERS PRODUCED IN COMBINING THE DIFFUSION CHROMIZING PROCESS AND PVD TREATMENT
Tribological properties of the CrC+CrN type hybrid layers, produced on X210Cr12 steel in chromizing process by the pack powder method combined with arc evaporation PVD treatment, have been investigated. A comparison of t...
THE ANALYSIS OF HYDRODYNAMIC PRESSURE DISTRIBUTION AND LOAD CARRYING CAPACITY IN THE GAP OF SLIDE JOURNAL BEARINGS WITH MICRO-GROOVES
The purpose of this paper is to analyse the distribution of hydrodynamic pressure, load carrying capacities, and friction force in the gap of the slide bearing on account of the type, number, and size of micro-grooves on...