Protective Coatingson Steel Tytanoalitovani 40X13
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 3
Abstract
Past studies on application to the surface of steel 40X13 multi tytanoalitovanyh coatings in containers of consumable shutter using a mixture of powders of titanium, aluminum; titanium hydride; tytanoalituvannya steel 40X13 with pre-deposited TiN layer; tytanoalituvannya pre-nitrided steel amongammonia. The possibility of forming coatings on steel 40X13 involving compounds Ti4Fe2O, FeTiAl, TiN, TiC and transition zone. Established distribution of chemical elements and micro hardness thickness diffusion coatings. The maximum microhardness detected for layers Tees - 31,0-34,0 GPa; TiN layersfor - 19,5-22,5 GPa; for the zone Ti4Fe2O, FeTiAl - 5,0-7,0 GPa.
Authors and Affiliations
V. G. Khyzhnyak, M. V. Arshuk, O. V. Khyzhnyak, A. I. Dudka, I. I. Bilyk
The Electrodeposition of Nickel Coatings, Modified Ultrafine Diamonds
The polarization analysis of nickelwhen the concentration of ultrafine particles of diamond (UFD) in the electrolyte solution and its frequency mixing. It was found that the addition of nanodiamond particles in an aqueou...
Effect of Nickel on Density and Surface Tension of Liquid Tin
Density and surface tension for Sn1-xNix(x = 0; 0,05; 0,1) have been measured by means of sessile drop method. Temperature dependences of these parameters as well as influence of Ni-atoms on density and surface tension w...
Thermodynamic Properties of Intermediate Phases of the Ag-Bi-Se System in the Temperature Range 535-578 K
In the galvanic elements C|Ag|AgI|glass Ag2GeS3|D|C (C – current electrodes, D – heterophase alloys of the Ag–Bi–Se system, AgI|glass Ag2GeS3 – two layer membrane with pure ionic (Ag+) conductivity) synthesis Ag with het...
Laser Illumination Influence on the Optical Characteristics of As40S60-xSex (0 ≤ x ≤ 15) Films
The results of investigation of the As40S60-xSex amorphous films transmission spectra depending on thickness, exposure and heat treatment conditions are given. It was established that the increase of Se content in films...
Гідротермальний синтез 3D наночасток дисульфід молібдену/ вуглець
В роботі представлено результати присвячені синтезу 3D багатошарових наночасток дисульфід молібдену / вуглець методом гідротермального синтезу з застосуванням в якості міцелоутворювача катіонів цетилтриметиламонію. Елеме...