Synthesis of Nanosized Powders with the Structure of Perovskite
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 1
Abstract
The aim of this work was to create and study of ferrite lanthanum powders, using sol-gel technology with participation of auto-combustion. After the sintering at a temperature of 1123 K only one phase, which corresponded to the solid solution LaFeO3, was obtained. It was found that obtained powders were agglomerated, and the size of the crystallites were less than 50 nm. It was researched the processes of phase transitions and chemical reactions, which the heating of synthesized material in the temperature range 298 - 1173 K accompany. It was shown that the process of forming of LaFeO3 phase occurs by heating the powder at a temperature of 1043 K.
Authors and Affiliations
V. S. Bushkova, B. K. Ostafiychuk, Yu. M. Tafiychuk, I. P. Yaremiy
Keywords
Related Articles
- EP ID EP313905
- DOI 10.15330/pcss.16.1.181-184
- Views 64
- Downloads 0
Effect of Solid-Phase Transformations on Plasticity Steels
Plasticity steels as dependence on concentration alloying element is researched. By example of researching ultimate strength (σ0,2) iron-carbon and iron-chrome steels is shown, that plasticity of metals depend on the sol...
Mechanical Activation of Mixtures SiO2/γ-Fe2O3 and its Impact on the Distribution of Valence Electrons
Crystalline and electronic structures of SiO2/γ-Fe2O3 mixtures have been analyzed using X-ray diffraction (XRD) and ultra-soft X-ray emission spectroscopy (USXES). The energy redistribution of Fesрd, Sisp and Op valence...
Chemical Treatment of CdTe and Solid Solution ZnxCd1-xTe and Cd0.2Hg0.8Te and Aqueous Solutions of HNO3–НІ-Lactate Acid
The method of disk rotating kinetics of dissolution processes CdTe, Zn<sub>x</sub>Cd<sub>1-x</sub>Te and Cd<sub>0.2</sub>Hg<sub>0.8</sub>Te in yodvydilyayuchyh etching compositions HNO<sub>3</sub>-NO-lactate acid. The de...
The Effect of Nature and Parameters of Particle Size Distribution of Graphite on Physical and Mechanical Properties of Polimer Composites based on Aromatic Poliamide
The resultsof studies of the effect of nature and parameters of particle size distribution of graphite on physical and mechanical properties of polymer composites based on aromatic polyamide fenіlon C-2. The particle siz...
Porosity Influence on the Kinetics of Boride Strength Degradation Due to Helium Swelling under Neutron Irradiation
A theoretical model for the estimation of boride porous ceramic strength degradation due to swelling during neutron irradiation is represented. Transmutation helium accumulation in two-dimensional defects considered to b...