Real-Time Compression Scheme for Urban Rail Transit Train Operation Data
Journal Title: Urban Mass Transit - Year 2025, Vol 28, Issue 1
Abstract
［Objective］ In view of the current challenges such as increased requirements for disk storage space, frequent disk damage and high bandwidth occupation existing in urban rail transit train operation data, research on data compression is of great significance for reducing storage space requirements, alleviating disk burden, and cutting bandwidth waste. ［Method］ By analyzing the characteristics of train operation data, the internal redundant characteristics of the data are studied from three dimensions i.e. time correlation, spatial correlation and overall redundancy of the data itself. A multi-dimensional real-time compression scheme with inter-frame compression, improved RLE (Run-Length Encoding) compression and ZIP compression is proposed to reduce the data redundancy. The scheme is proved to be effective by the real-time verification test of algorithms and the verification test of the actual train operation data. ［Result & Conclusion］ The proposed multi-dimensional real-time data compression scheme features low complexity, strong compression ability and fast compression speed. Tests and applications show that it takes only 0.16 ms for the real-time data compression with the proposed scheme, meeting the 20.00 ms data acquisition cycle requirement. The final compression ratio with the proposed scheme can reach 3.35%, and hardware of the same cost can store data for a longer time. The final amount of data written to storage disks and wirelessly transmitted is reduced to 11.83% of the original one, greatly reducing the times of disk erasures and the amount of data wirelessly transmitted, and effectively lowering the disk storage failure rate and the occupancy of wireless transmission bandwidth.
Authors and Affiliations
Dexiang LI, Linmei WANG, Shu WANG
Keywords
Related Articles
- EP ID EP755023
- DOI 10.16037/j.1007-869x.2025.01.046
- Views 32
- Downloads 0
Optimal Algorithm of Tram Section Energy-saving Speed Curve under Fixed Time Constraint
Objective Calculation of tram operation control scheme taking into account energy consumption requires a great deal of calculation of the energy-saving speed profile. In order to establish an accurate and efficient optim...
Metro Vehicle Bogie Abnormal Vibration and Fatigue Failure
Objective Due to the increase of metro operation mileages and track conditions complexity, abnormal bogie vibrations caused by wheel-rail wear often occur. Bogie frame serves as an important load-bearing component, requi...
Numerical Analysis of Smoke Temperature Characteristics below the Fire Ceiling in Main Transformer Room of Urban Rail Transit Substation
Objective With the increasing power supply load required by metro, the operation of oil-immersed equipment such as wet-type transformers under overload conditions is extremely prone to fire, posing a threat to the safety...
Structural Force Monitoring and Calculation of the Metro Shield Tunnel in Subsea Weathered Slot
Objective In order to explore the load distribution characteristics of shield tunnel structures in subsea weathered slot, a study on the internal force response law of the segment structures is carried out. Method Relyin...
Development of Short-Circuit Impedance Testing and Setting Calculation Device for Urban Rail Transit Catenary
Objective The line impedance of urban rail transit catenary is significantly affected by many factors such as wire material, line length, surrounding environment, etc., resulting in significant impedance differences betw...