Recovery of Pyrolytic Oil from Thermal Pyrolysis of Medical Waste
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 2
Abstract
In this paper, potential of beneficial products recovery was investigated from plastic medical waste (PMW) by pyrolysis process. Disposable plastic is one of the chief items in the medical waste. High density polyethylene and Polypropylene is the main component of several PMW. These plastics have a higher latent as hydrocarbons sources for chemical industry. Pyrolysis of PMW was accomplished at a temperature range of 200–300 °C in a batch reactor make up of stainless steel. The chemical and physical properties of the pyrolysis liquid were much closer to the commercial fuel like diesel, petrol etc. The density is 840 kg/m3, the gross calorific value is 4.13·104 kJ/kg flash point is 39 °C in produces pyrolytic oil. This liquid can be used as alternative sources of fuel.
Authors and Affiliations
U. Som, F. Rahman, S. Hossain
Keywords
Related Articles
- EP ID EP416409
- DOI 10.21272/jes.2018.5(2).h2
- Views 78
- Downloads 0
Characterization and Degradation of Viton Fuel Hose Exposed to Blended Diesel and Waste Cooking Oil Biodiesel
Degradation and material incompatibility between biodiesel and fuel system are the major concern associated with the adoption of biodiesel. In this research, effects of different mixture of waste cooking oil biodiesel/di...
Hydrodynamics of a Liquid Film Downflow on a Flat Surface in Evaporation Conditions into a Flow of Neutral Gas
The work is devoted to the study of the gravitational motion of a liquid film under evaporation conditions into a flow of neutral gas as applied to film machines with a plane-parallel nozzle. The aim of the work is to de...
Polymeric compositional materials based on polycarbonate for units of devices for transform solar into thermal energy
Modern development of the industry is complicated without introduction of energy-saving technologies based on renewable natural energy sources. Solar and wind power plants, heat generators, solar collectors are wide spre...
Research of Mechanical Properties of Thermite Material on the Basis of Steel Dross
Important direction in the development of technologies for the recycling of wastes of industrial productions is inclination on the use energy saving technologies. The article deals with general aspects of methods of util...
Spline shaft hob cutter accuracy increase by the means of theoretical profile approximation by the circle involute section
One of the most wide spread and efficient spline shafts manufacturing methods is their cutting by the means of generating process by hob cutters. In this case, hob cutter’s theoretical profile, taking in to account its i...