Recycling of Cellulosic Waste in the Energy Sector
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 1
Abstract
Biomass is one of the Earth’s most abundant and precious resources. It offers not only food but also energy, materials used for construction, chemicals and much more. Biomass has always been used for generating energy since fire was discovered. The term of biomass covers a wide range of products, derived products and waste obtained from agriculture, forestry, including those derived from farming, domestic and industrial waste. This paper aims at investigating the main characteristics of the briquettes made out of wood, wood chips and sawdust.
Authors and Affiliations
Mircea Viorel DRĂGAN
Keywords
Related Articles
- EP ID EP590595
- DOI -
- Views 79
- Downloads 0
Study of Heat Treatment Influence on Aluminum - Based Alloy ATN-Si10Cu4
This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy. The laboratory level experiments achieved on samples of ATN-Si10Cu4 (4145 series) alloy illustrate the va...
Research on Influence of Metallurgy Factors on the Quality of Metal Components in Metal-Ceramic Prosthetic Restorations
The paper summarizes the characteristics of the metal component in the structure of metal-ceramic fixed prostheses and the technological conditions for obtaining it. The paper presents partial results of an experimental...
Research on the Influence of Chemical Composition and Structural Condition on the Properties of High-Resistance Naval Steel Flat Rolled Products
The performance achieved in the manufacture of large ships and components of special characteristics requires the use of quality metallic materials with physico-chemical and mechanical characteristics able to satisfy the...
Influence of Cooling Oil on the Surface Quality of the Rolled Strip
The excess of emulsion used in the lamination process leads to the formation of drops which in the annealing process forms spots of burned emulsion. It was also shown to cause formation areas with high carbon concentrati...
Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature of 1050 °C
Nitriding at low temperatures, 450-500 oC of austenic stainless steels lead to the obtaining of the tough layers over 1000 HV005 but having thicknesses of tenths of microns. Moreover, nitriding at 500ºC has determined th...