Removing Nickel and Zinc from aqueous environments using modified cocopeat
Journal Title: International Research Journal of Applied and Basic Sciences - Year 2013, Vol 4, Issue 11
Abstract
The aim of this study is to investigate the potential of Cocopeat to removal Ni and Zn from aqueous solutions.In this study, the Cocopeat materials were pretreated separately with 0.4 mol/L NaOH, 0.4 mol/L HNO3 and bi distillated water. After the materials were prepared, their adsorption capacity was compared with each other. Bath adsorption experiments were carried out in primary concentrations of ionic Ni and Zn and also the effect of pH variations and adsorbent dosage were obtained. Adsorption of metals ions on modified cocopeat determined with Langmuir and Freundlich's models. The results showed that the best method for Ni and Zn removing was to use Modified Cocoapeat by acid. In addition, in this study the maximum Ni and Zn adsorption were obtained 44 and 50 mg/l in acidic solution respectively. Other finding showed that Langmuir model was identified as the best Isotherm model for the two metals. In comparing the parameters of models, it was obtained that the high capacity and the force of adsorption of Cocopeat were more for Zn than Ni and the adsorption of metals with adsorbent was single layer. Finally according to the results and also regarding the low price of Cocopeat, its easy preparation and modification and its adsorption capacity, Cocopeat is a good adsorbent for Zn and Ni.
Authors and Affiliations
Fatemeh Einollahipeer*| Member staff of Department of Environment, Faculty of Natural Resources, University of Zabol, fatemeh.eynollahi@uoz.ac.ir, Sahel Pakzadtoochaei| Member staff of Hamun international wetland Research Institute, University of Zabol
Image edge detection using the hidden Markov model based on normal distribution with optimum expectation
THE HIDDEN MARKOV METHOD IS A ROBUST MODEL WHICH IS EMPLOYED IN VARIOUS FIELDS OF SCIENCE. ALTHOUGH IT HAS FREQUENTLY BEEN USED IN EDGE DETECTION THE WAVELET TRANSFORMATION HAS ALWAYS BEEN INCLUDED IN THE PROCESS. IN THI...
Benefits and goals of designing ofzero energyschools
The environmental effects of the use of fossil fuels are becoming more obvious and concern is increasing rapidly.As in the building sector energy savin objectives are from 15 to 30% in terms of specific energy consumptio...
Geotechnical factors for foundation design by considering axial loading
Allowable stress design (ASD) methods have been used for designing foundations and other geotechnical applications. The geotechnical resistance of a pile arises as a combination of side friction, where load is transmitte...
Effect of dynamic fluid properties on heat exchanger performance
The performance of convective heat transfer devices is necessarily linked to the characteristics of the participating fluid flow. The most common connection between the heat transfer and the fluid flow is by means of the...
Study of factors affecting operational electronic banking risks in Iran (Case Study: Melli bank of Kermanshah)
Recently, banks have been providing their electronic services to customers remotely. This technological innovation by E– banking systems has been accompanied by several risks in addition to benefits it has brought about...