Research and Analysis of Rapidly Changing Gas Flow Temperatures Measurement Methods
Journal Title: Energy Engineering and Control Systems - Year 2017, Vol 3, Issue 1
Abstract
The temperature of a transducer sensitive element, as a result of its heat capacity, will always lag behind the temperature of the gas flow if this temperature changes. When measuring the flow temperature that varies in time, the transducer doesn't follow the changes in temperature immediately because its sensitive element temperature changes after some time. The distortions of the transducer readings are caused by the thermal inertia due to non-stationary heat processes in the transducers, as well as between transducer and the environment. Since complete elimination of real temperature transducer inertia is not possible, the transducers with some finite values of the thermal inertia are used at practice to measure the varying gas flow temperature. The necessary information about the flow temperature can be obtained by analyzing the record of the non-stationary measurement process. In this case a direct calculation of the flow temperature is made or a correction of the temperature transducer readings delay is made. The results of research and analysis of measurement methods of rapidly changing gas flow temperatures by the direct calculation of the flow temperature and by correcting the temperature transducer readings are presented in this paper.
Authors and Affiliations
Vasyl Fedynets, Leonid Lesovoi, Bohdan Chaban
Keywords
Related Articles
- EP ID EP256980
- DOI 10.23939/jeecs2017.01.029
- Views 83
- Downloads 0
Energy Efficiency of Refrigerating Ejector Systems for the Condensation of Oil Product Liquid Hydrocarbons
The oil processing enterprises are the largest consumers of fuel and energy resources, heat and electrical energy. Efficiency, rationality of their use in oil refining processes in many respects is defined by overall per...
Selection of Functional Diagram of Air Multi-Compressor Control System
Compressed air generation systems are a necessary facility for most enterprises; they also belong to the most energy-consuming equipment category. Study of transients of these systems’ operation is a prerequisite for cre...
Design of Optimal Filter for Analog Signal
The technique for designing the optimal value of the filter time constant for analog signal is presented in the paper. This technique is based on the objective function which takes into account the quality index of the f...
Peculiarities of Non-Stationary Pressure Measurement in Real Time
Nowadays, industrial development creates new and more complex processes leading to emergence of specific conditions for use of sensors and therefore specific measurement tasks. These circumstances lead to new requirement...
Simulation of Dynamic Processes of Gas Flow in Collector Systems
By using CFD-simulation, plug length simulation of local resistance type plugged tee, which changes the flow direction, using equations of hydrodynamics was carried out. During simulation, velocity of medium in the threa...