RESEARCH ON HYSTERESIS OF TRIGGERING PROBES APPLIED IN COORDINATE MEASURING MACHINES
Journal Title: Metrology and Measurement Systems - Year 2005, Vol 12, Issue 4
Abstract
The article presents selected results of investigation of triggering probe hysteresis in coordinate measuring machines. The research covered the hysteresis of pretravel of one-stage triggering probes equipped with a switching transducer (represented by TP6 probe), and two-stage probes equipped with a piezoelectric transducer (e.g. TP200 probe). The effects of stylus length, measurement pressure and approach speed to the measured surface have been included in the performed tests. The variance analysis methods have been used to evaluate the effects. The results, obtained in various conditions and using different probes, have been compared. As a result, optimum values of tested parameters have been estimated, as far as they concern the operation accuracy of the probe.
Authors and Affiliations
ADAM WOŹNIAK, MAREK DOBOSZ
Keywords
Related Articles
- EP ID EP96833
- DOI -
- Views 46
- Downloads 0
DIGITAL MEASUREMENT OF PHASE DIFFERENCE - A COMPARATIVE STUDY OF DSP ALGORITHMS
The paper compares nine methods of measurement of the phase difference of digitized sinusoidal signals mainly according to their sensitivity to sampling non-integer number of signal periods. The investigated methods can...
SEVERAL APPROACHES TO ADC TRANSFER FUNCTION APPROXIMATION AND THEIR APPLICATION FOR ADC NON-LINEARITY CORRECTION
The performance of current electronic devices is mostly limited by analog front-end and analog-to-digital converter's (ADC) actual parameters. One of the most important parameters is ADC nonlinearity. The correction of t...
ON IMPROVEMENT OF SAMPLING TECHNIQUE DESIGNED FOR PRECISE ROOT MEAN SQUARE MEASUREMENTS<br />
A method for precise root mean square (RMS) measurement of periodic signals based on signal reconstruction is analysed. The RMS value of a signal under test is determined in three steps. In the first step, the Fourier co...
ANALYTICAL MODELLING OF KARMAN VORTEX STREET
A new approach to the Karman vortex street modelling is presented. The model is based on observations of the Karman vortex street. The idea of the model is based on fundamental mechanical formulas. According to the model...
ELIMINATION OF NONLINEARITY WITH DISCONTINUITIES (OF THE DEAD ZONE) FROM STATIC CHARACTERISTIC OF CONVERTER
The characteristics of real converters, including sensors, are - to a smaller or larger extent - nonlinear. Nonlinearity may result from the technologies applied to produce the converter or from the type of processing to...