NTERCOMPARISON OF WATER TRIPLE POINT CELLS FROM INTIBS AND INRIM
Journal Title: Metrology and Measurement Systems - Year 2008, Vol 15, Issue 4
Abstract
The triple point of water defines the unit of thermodynamic temperature, kelvin, and is the most important fixed point of the International Temperature Scale of 1990. Several international comparisons of cells for the realization of the water triple point were carried out to estimate the temperature values obtained in real conditions at national metrology institutes. A separate bilateral comparison was set up for INTiBS, Poland with INRiM, Italy, as CCT-K7 participant, in order to create a direct reference to CCT-K7 for the Polish institute. Results of the bilateral comparison carried out as EUROMET project no 895 are presented in this paper.
Authors and Affiliations
A. Szmyrka-Grzebyk, L. Lipiński, Peter Steur, R. Dematteis
Keywords
Related Articles
- EP ID EP154916
- DOI -
- Views 52
- Downloads 0
INFLUENCE OF THE STRUCTURE OF SIGNAL CONDITIONING CIRCUITS ON THE UNCERTAINTY OF IMPEDANCE MEASUREMENT WITH ALGORITHMIC METHODS
The article presents an estimation of the impedance measurement uncertainty determined in the measurement circuit with a two-channel sampling transducer. Using the Monte Carlo method, the influence of dynamic error and q...
ANALYSIS OF THE IRREGULARLY SAMPLED SIGNALS ABOVE THE NYQUIST LIMIT
A new method of spectrum analysis of the nonuniformly sampled data above the Nyquist limit is proposed, which is based on the digital spectral shift to the baseband, optional filtering and the subsequent spectrum analysi...
ESTIMATION OF YOUNG'S MODULUS AND ADHESIVE FORCE OF POLYMERIC FILMS BY USE OF ATOMIC FORCE MICROSCOPE
Nowadays a big interest exists in microengineering forces to study and test microsystems and their components. There exist a lot of methods and tools to perform this kind of investigations. Most of them need good skills,...
QUANTUM HALL EFFECT: THE FUNDAMENTALS
The basic understanding of the physics behind and the reasons for very high precision of the resistivity ρxy quantisation in integer quantum Hall effect (IQHE) and the application of the effect in metrology to define a q...
MEASUREMENT OF COMPLEX CONDUCTIVITY IN CARBON NANOTUBE POLYMER COMPOSITES UNDER MECHANICAL SHEAR
We measured the complex conductivity of carbon nanotube-polypropylene composites under mechanical shear conditions. In order to determine how flow alters the properties of these complex fluids we constructed a rheo-diel...