Research on the Formability of Aluminum Sheet Rear Door Inner Plate Based on AutoForm Analysis
Journal Title: Automobile Technology & Material - Year 2024, Vol 39, Issue 3
Abstract
To address the issue of difficulty in designing and producing aluminum plate rear door inner plate caused by poor formability and ductility of aluminum plate material, complex shape of rear door inner plate, this paper introduced the simulation analysis of the formability of aluminum plate back door inner plates theoretically based on Autoform finite element software. Through simulation analysis of different solutions, the final forming solution was determined which guided on-site production, and was verified in on-site debugging.
Authors and Affiliations
Zhao Hui, Li Kai, Zhang Xiongfei, Song Tieming, Hu Yong
Keywords
Related Articles
- EP ID EP732982
- DOI 10.19710/J.cnki.1003-8817.20230118
- Views 47
- Downloads 0
Research on Assembly Torque Attenuation of Steering Knuckle Cone Ball Stud
In order to eliminate abnormal sound of the knuckle cone ball stud of a passenger car on proving ground test, this paper proposed a new method based on virtual simulation. Firstly, the ball stud contact area variation te...
Weld Characteristics and Properties of Laser Wire Filling Welding for Thin-Coated Hot-Formed Steel
To reduce the adverse effect of aluminum silicon coating layer on the surface of steel plate on laser joint, laser wire filler welding joint with aluminum mass fraction less than 1% in weld was obtained by using thin-co...
Fracture Analysis and Rectification of Trunk Lid Torsion Bar Spring
In order to determine the fracture mechanism and cause of the trunk lid torsion bar spring, the fracture morphology, composition, size, material strength, microstructure and residual stress were tested, and a comprehen...
Research on the Fasten Process of Coupler Based on Automatic Spindle Equipment
In order to improve working efficiency, operation accuracy and safety, and reduce the error rate, based on the automatic spindle equipment, after the engine is connected to the gearbox, the servo motor of the spindle e...
Nonlinear Optimization Design of Extruded Aluminum Sill Based on ESL Method
For the forward design of extruded aluminum door sill section in side pole crash condition, this paper analyzed the pros and cons of the Equivalent Static Load (ESL) based nonlinear optimization and traditional optimizat...