Research on the Impact of Wheel Polygonalization on Metro Bogies
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 5
Abstract
Objective The objective is to investigate the impact of wheel polygonalization on metro bogies, thereby strengthening the control requirements for wheel polygonalization, and enhancing the operational quality and safety performance of bogies. Method Based on the introduction of the concept of wheel polygonalization and the mathematical expression of polygonalization using methods such as wheel off roundness testing, modal testing, vibration testing, and stress testing, type of metro is comparativety tested. Result & Conclusion According to the test data: wheel polygonalization can cause main frequency vibration of the axle box position; wheel polygonalization can amplify the magnitude of axle box vibration, with the test object containing obvious wheel polygonalization resulting in an 18% increase in axle box vibration; when the excitation frequency of wheel polygonalization is close to the structural modal frequency, the structural stress will increase significantly, with the stress at key measuing points increasing by more than twice, indicating that wheel polygonalization has a significant impact on structural strength.
Authors and Affiliations
Wei JIN, Buzhen XU, Ming REN
Keywords
Related Articles
- EP ID EP735606
- DOI 10.16037/j.1007-869x.2024.05.003
- Views 55
- Downloads 0
Construction and Application of Index System for Safety Effectiveness Evaluation of Urban Rail Transit Line Maintenance Construction
Objective At present, there are relatively few studies on the safety assessment of maintenance and construction of urban rail transit operation lines. In order to reduce the operation safety risk of urban rail transit li...
Calculation Method for Heat Transfer Coefficient of Urban Rail Transit Aluminum-alloy Vehicle Enclosure Structure Based on Thermal Resistance Model
Objective According to the characteristics of urban rail transit aluminum-alloy vehicle enclosure structure，a K-value calculation method based on thermal resistance model is studied, thereby improving calculation accura...
Influence of Metro Shield Left/Right Line Tunnel Parallel Under-passing on the Defor-mation and Stress of Existing Open-cut Highway Tunnel under Deformation Joint Working Condition
Objective To ensure the successful implementation of metro shield tunnel parallel under-passing through the existing open-cut highway tunnel project under deformation joint condition, it is necessary to analyze the defor...
Research on Measurement Method of Wheel-rail Vertical Force of Urban Rail Transit
[Objective] A large number of tunnel diseases usually occur during the operation of urban rail transit, and the main cause of the diseases is the wheel-rail force. Therefore, it is necessary to study the method of measur...
Simulation of Full-axle Steering Control Strategy for DRT
Objective Digital rail transit of rubber-tyred train (DRT) features a complex running structure with multiple carriages and axles, significantly differing from conventional rubber-tyred trains. Therefore, it is necessary...