Research Regarding the Anticorosiv Protection of Atmospheric andVacuum Distillation Unit that Process Crude Oil
Journal Title: Tribology in Industry - Year 2011, Vol 33, Issue 4
Abstract
Due to high boiling temperature, organic acids are present in the warmer areas of metal equipment from atmospheric and vacuum distillation units and determine, increased corrosion processes in furnace tubes, transfer lines, metal equipment within the distillation columns etc. In order to protect the corrosion of metal equipment from atmospheric and vacuum distillation units, against acids, de authors researched solution which integrates corrosion inhibitors and selecting materials for equipment construction. For this purpose, we tested the inhibitor PET 1441, which has dialchilfosfat in his composition and inhibitor based on phosphate ester. In this case, to the metal surface forms a complex phosphorous that forms of high temperature and high fluid speed. In order to form the passive layer and to achieve a 90% protection, we initially insert a shock dose, and in order to ensure further protection there is used a dose of 20 ppm. The check of anticorrosion protection namely the inhibition efficiency is achieved by testing samples made from steel different.
Authors and Affiliations
M. MOROSANU, M. G. PETRESCU, N. N. ANTONESCU
Keywords
Related Articles
- EP ID EP140349
- DOI -
- Views 74
- Downloads 0
Influence of Composition of Plant Oils on Their Tribological Properties
Sunflower, corn, rapeseed, olive, and linseed oils were used for investiga-tion. Their fatty-acid compositions have been evaluated by gas chroma-tography. The tribological properties were determined with a four-ball mach...
Simulation of Contact Area and Pressure Dependence of Initial Surface Roughness for Cermet-Coated Discs Used in Disc Brakes
Friction, wear, and emission performance strongly depend on the contact pressure and area at the interface of the pad and disc. The contact situation at the pad-to-disc interface can be explained by the formation and des...
Characterization of the Tribological Properties of Bismuth-titanate Coatings Synthesized by Sol-gel on 316L Stainless Steel Substrates
The objective of this investigation was to obtain ceramic coatings of bismuth titanate by Sol-gel synthesis on 316L stainless steel substrates using bismuth nitrate pentahydrate (III) and titanium tetrabutoxide as precur...
The Influence of the Relative Sliding on the Surface Quality
This paper presents a study on the surface quality pointing out the influence of relative sliding on the topography parameters. Traditional roughness parameters as Ra and Rq, deal only with relative high of the asperitie...
Interpretation of the Friction Coefficient During Reciprocating Sliding of Ti6Al4V Alloy Against Al2O3
Tribological behaviour of Ti6Al4V alloy, during linear reciprocating sliding against alumina, at nanotribometer (ball-on-flat type of contact) was investigated. Experiments were carried out for sliding in Ringer's soluti...