Research Regarding the Obtaining of Some Composite Materials with Metallic Matrix from Aluminium and FeTi (3% Ti) Refractory Particles
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 1
Abstract
The aim of the paper is to create a composite material by a mechanical mixing method to be used in the field of steels elaboration in the deoxidizing and alloying stage.
Authors and Affiliations
Vasile BASLIU, Florentina POTECAŞU
Keywords
Related Articles
- EP ID EP629290
- DOI -
- Views 43
- Downloads 0
Quality Engineering Procedures Applied to Determine the Weight of Influence of Factors on Microtrigeneration Systems (MCCHP)
Microtrigeneration systems are characterized by simultaneous generation of power, heat and cold for small applications (<50kW) and are designed for reducing GHG and other emission degreases. The cooling generation by abs...
Study of RV52 Steel Plates Properties after Thermic Treatment
The thermal treatment of RV52 steel plates determines high mechanical properties such as: strength, wear resistance and tenacity. The normalized plate samples were studied to determine the effect of the tension release h...
Study on the Use of Oxygen-Enriched Combustion Air at the Ignition Initiator Furnace from the Agglomeration Machine
Comparative study on the use of oxygen-enriched combustion air at the homogenization coal ignition coil from Dwight-Lloyd agglomeration No 5 from the ArcelorMittal Galati metallurgic plant to reduce fuel consumption, inc...
Experimental Aspects for CeO2 Nanoparticles Synthesis and Characterization
In recent years, cerium oxide (CeO2, or ceria) became a versatile nanostructured material because of its unique properties derived from the low dimensionality and high surface area. It was also extensively studied due to...
Studies on the Heat Recovery from the Sinter Cooler, S.C. ArcelorMittal Galati
Heat recovery to the sinter plant is a means of improving the efficiency of the sintering process. The hot agglomerate must be cooled down. The heat recovered from the sinter cooler is used to preheat the combustion air...