RESTORATION AND ENHANCEMENT OF EMPLOYMENT BODIES OF THE EMERGENCY-TAKING INSTRUMENT
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 76, Issue
Abstract
To accomplish the task of saving people and material values, the rescuers of the DSNU use a variety of equipment and special tools, the reliability of which depends not only on the lives of victims, but also on the rescuers themselves. Today, fire and rescue units in Ukraine often use machinery and equipment that has expired or service life and parts and whose working bodies are partially worn out. The use of protective coatings based on eutectic alloys Fe-Mn-C-B-Si doped Cr can improve the wear resistance of fire and emergency rescue equipment. The application of these materials by the method of surfacing GMA (MAG) allows you to recover partly worn or damaged working elements and parts, which is more cost-effective than replacing these parts with new ones. The surfaced protective coating has a high adhesion with the substrate material. No layers and significant defects have been detected in the deposited layer. Restoration of worn working tools of the emergency rescue tool with eutectic coating on the basis of Fe-Mn-C-B-Si doped Cr system allowed to increase their wear resistance ~ 1,8 times.
Authors and Affiliations
M. I. PASHECHKO, T. G. BEREZHANSKIY
Keywords
Related Articles
- EP ID EP366340
- DOI -
- Views 34
- Downloads 0
MODELING AND STUDY OF THE CYLINDER REDUCER WEAR FOR MOBILE ROBOT
At the design stage, attention is paid to the executive system, which is the main mechanical component of the robotic system. A malfunction or incorrect operation of one link of a me-chanical system leads to a malfunctio...
EXPERIMENTAL RESEARCHES OF ENERGY LOADING OF FRIC-TION PAIRS OF BAND-BLOCK BRAKES WITH AN AIR-LIQUID COOLING SYSTEM (part three)
The materials of the article show the optimization design of the composite brake pulley, with heat currents circulation in it and the gradients of the heat transfer coefficients. The purpose of the work is to justify the...
INVESTIGATION OF THE INFLUENCE OF FRICTION PAIR ELEMENTS CONTACT GEOMETRY ON FRETTING-CORROSION WEAR PROCESS
Questions of dependence of wear intensity of friction pairs material on the scheme and the con- tact size of friction pair elements, and also on the amplitude-loading fretting parameters are considered. The research was...
TO THE QUESTION OF CALCULATION AND DESIGN OF DIFFERENT TYPES OF DISKS FOR THE SUBJECTS OF MOTOR VEHICLES
In disk-block brakes use both solid and self-ventilated discs with a developed system of venti-lation holes and channels in the body of the disc with polished and matte its side surfaces. These surfaces interact with hig...
DEFLECTED MODE OF CUTTING TOOLS WITH DISCRETE COATINGS
The results of the numerical calculations of the stress-strain state of the cutting edge tool without coating, with continuous and discrete coatings. We consider the problem of determining the temperature field and analy...