Results of numerical modeling of the process of harvesting the seeds of flax by a harvester of the stripping type
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 3, Issue 1
Abstract
<p>The purpose of the current theoretical study is to improve the efficiency of the technological process of harvesting flax seeds with a harvester of the stripping type by substantiating its structural-operational parameters. The goal has been accomplished by constructing an appropriate physical-mathematical model that takes into consideration the technological parameters for operation of the harvester, as well as the physical-mechanical properties of a flax pile. The theoretical study has been performed by means of numerical simulation using the software suite STAR-CCM+. The physical-mathematical apparatus is based on the k-ɛ conjugated flow turbulence model, a van der Waals model of real gas, averaging by Reynolds, a Navier-Stokes equation, a Lagrangian multiphase model, and a discrete element model.</p><p>The undertaken theoretical research has established the effect of structural-technological parameters of the stripping-type harvester on the quality of the process in its region when harvesting flax by direct harvesting when stripping plants at the root. It has been proven that the course of the process is substantially affected by an air flow resulting from the operation of a beat-reflector and a harvester’s stripping rotor. The result of numerical modeling of the process of separating a flax pile in the stripping-type harvester is the derived distribution of an airflow in its region. We have determined the dependences of maximum speed of an airflow on the rotation frequency of the beat-reflector and stripping rotor. The maximal air flow speed is V V<sub>max</sub>=30 m/s, predetermined by the rotation frequency of the beat-reflector and stripping rotor: n<sub>1</sub>=n<sub>2</sub>=800 rpm. We have substantiated the position of an air grid and approximated the shape of the casing. The following rational structural-technological parameters have been obtained, which contribute to improving the quality of the process of pile separation: the rotation frequency of beat-reflector n<sub>1</sub>=782 rpm, the rotation frequency of stripping rotor n<sub>2</sub>=671 rpm, the position of a transparent zone border L=0.82 m and its width B=0.45 m. The constructed physical-mathematical models allow targeted control over the operational parameters of the stripping-type harvester in the process of harvesting flax seeds.</p>
Authors and Affiliations
Olecsiy Kozachenko, Andrii Pakhuchyi, Olexander Shkregal, Sergey Dyakonov, Oleg Blaznyuk, Volodymyr Kadenko
Construction of an algorithm for the selection of rigid stops in steel concrete beams
<p>Calculation of steel-concrete beams is performed with a rigid connection between concrete and a steel strip. This is possible if one installs hard stops that prevent the displacement of the strip with respect to concr...
Improving energy efficiency of coal transportation by adjusting the speeds of a combine and a mine face conveyor
<span lang="EN-US">The object of this research is the process that forms the weighted specific energy consumption for the transportation of rock mass by a coal face scraper conveyor at intensive coal mining under conditi...
Analysis of quality of grain shortbreads for biological activity and medicalbiological assessment
<p class="a">Quality control of new speltbased grain crispbreads with the addition of plant additives by the biological activity and medicobiological assessment was examined and analyzed. It was found that plant additi...
Experimental study into energy consumption of the manure removal processes using scraper units
<p>We have experimentally investigated the patterns in the influence of opening angle of the scraper unit, inclination angle of scrapers, and motion speed of the scraper unit, on specific energy consumption by the improv...
Aloe vera as cutting fluid optimization using response surface method
<p>The fluid of vegetable Aloe Vera has characteristics as a cutting fluid, Aloe Vera cutting fluid (AVCF) has an excess of environmental reduction effects from oil-based cutting fluid (OBCF). Surface Response Methodolog...