RESULTS OF NUMERICAL MODELING OF THE STRESSED-DEFORMED STATE OF THE JOINT CONNECTION OF WOOD CONSTRUCTIONS WITH CFRP DOWEL PINS
Journal Title: International Journal for Computational Civil and Structural Engineering - Year 2018, Vol 14, Issue 2
Abstract
A comparative analysis based on a series of numerical simulation experiments in the ANSYS software for determining the bearing capacity and the optimal arrangement of CFRP dowel pins in the joints of wooden structures. As variable parameters, the number of pins in the joint and the angles of pasting dowels into the wood are taken. Generalized conclusions are drawn on various configuration options with the selection of optimal design performance parameters for the same load. The voltage distribution iso-poles are shown, the dependence curves of the controlled parameters are plotted for each case considered. A comparative analysis of the stress- strain state of the compound with the results of calculations is carried out according to the procedure stipulated by the current norms and rules of the strength. Recommendations are given on the arrangement of dowels, as well as on the improvement of joints with the use of composite materials.
Authors and Affiliations
Mikhail A. Vodiannikov
Keywords
Related Articles
- EP ID EP576661
- DOI 10.22337/2587-9618-2018-14-2-48-56
- Views 58
- Downloads 0
ABOUT SEVERAL NUMERICAL AND SEMIANALYTICAL METHODS OF LOCAL STRUCTURAL ANALYSIS
Numerical or semianalytical solution of problems of structural mechanics with immense number of unknowns is time-consuming process. High-accuracy solution at all points of the model is not required normally, it is necess...
КОНЕЧНОЭЛЕМЕНТНОЕ МОДЕЛИРОВАНИЕ ВЫГИБА ПРЕДНАПРЯЖЕННЫХ ЖЕЛЕЗОБЕТОННЫХ БАЛОК
For large-span reinforced concrete beam structures developed by the method of determining the camber due to the prestressing of a steel rope on the concrete. Performed numerical experiments to study the impact of various...
TWO-STAGE GRID METHOD OF SOLUTION OF BOUNDARY PROBLEMS OF STRUCTURAL MECHANICS WITH THE USE OF DISCRETE HAAR BASIS
The distinctive paper is devoted to development of two-stage numerical method. At the first stage, the discrete problem is solved on a coarse grid, where the number of nodes in each direction is the same and is a pow-er...
МОДЕЛИРОВАНИЕ УСИЛЕНИЯ КОНСТРУКЦИЙ КОМПОЗИТНЫМИ МАТЕРИАЛАМИ В ПК «ЛИРА-САПР»
В статье предложена методика моделирования усиления конструкций композитными материалами в программном комплексе "ЛИРА-САПР". Приводится пример осуществления проверки несущей способности усиленных элементов конструкций в...
О ПРИМЕНЕНИИ РАСШИРЕННЫХ ТЕОРИЙ ПЛАСТИН И.Н. ВЕКУА – А.А. АМОСОВА К ЗАДАЧАМ О ДИСПЕРСИИ ВОЛН
Расширенная теория пластин И.Н. Векуа – А.А. Амосова построена на базе метода пространственной редукции задачи механики деформируемого твердого тела и Лагранжева вариационного формализма аналитической динамики континуаль...