Scheme of High Speed Contact Rail System for 120 km/h and above
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 6
Abstract
Objective In order to meet the demand for traction current collection in rail transit at the speed of 120 km/h and above, the research on high speed contact rail system is conducted and a complete optimization scheme is proposed. Method Based on the analysis of the influencing factors of shoe rail current collection, the idea about optimizing the quality of the high speed current collection is put forward. Optimization measures are proposed from the aspects of design, plane layout, construction and installation of the contact rail parts, and a complete scheme for the high speed contact rail system is formed. Two methods of reducing the ramp slope and adding elastic elements to the ramp support at the ends are adopted, aiming to reduce the impact force and prolong the action time for the shoe rail contact improvement. The insulation sectionalizer is used to replace the mechanical fracture. The elevation of the connecting passage is raised to be flush with the evacuation platform. The power section at the station end is laid out in the light of the turnout to reduce the quantity of contact rail fractures. The insulation span is appropriately shortened to reduce the deflection of contact rail. Modular assembly is adopted to improve construction accuracy of the contact rail. Result & Conclusion The above measures improve the current collection quality of the contact rail system, raising that of the contact rail at the speed of 120 km/h and above.
Authors and Affiliations
Qilai HUANG
Keywords
Related Articles
- EP ID EP737776
- DOI 10.16037/j.1007-869x.2024.06.047
- Views 53
- Downloads 0
Stability Study of Confined Aquifer Foundation Pit Bottom Plate Inrush Based on Nonlinear Failure Criterion
[Objective] In water-rich rock stratum regions, preventing confined aquifer inrush accidents is a key focus and challenge in the design and construction of deep foundation pit projects. Accurately and effectively determi...
Study on Mechanical Performance of Tunnel Interface between 3D Printed Lining and Surrounding Rock
[Objective] Research on and application of 3D printing technology in engineering structure construction are gradually deepening. Applying 3D printing in tunnel construction creates a new idea and approach. In the process...
Analysis of Factors Influencing Self-compacting Concrete Construction Quality for Prefabricated Track Slabs in Urban Rail Transit
Objective In response to the problems of narrow construction space, difficulty in controlling the construction quality of prefabricated track slab subgrade, and high requirements for the construction quality of self-comp...
Comprehensive Evaluation Method and Practice of Equipment Health Grade on Signaling System Service Life Prolonging Requirements
Objective Evaluation methods for conventional equipment health grade tend to be one-sided and limited in scope. There is a need to develop an evaluation method tailored to the stringent safety demands of signaling system...
Variable-position System for Balises in Automated Vehicle Depot
Objective The restriction and impact of balises in the maintenance trench of automated vehicle depots on vehicle maintenance grow increasingly prominent. Therefore, it is necessary to conduct a research on the variable-p...