Segmented Manufactured and Constructional Technology of Curved Single Steel Tower with Large Radian of Cable-stayed Bridge
Journal Title: 河南科技大学学报(自然科学版) - Year 2019, Vol 40, Issue 3
Abstract
Taking the construction of single tower steel tower of Guohe No. 3 Bridge in Anhui Province as engineering background, the outer radius of the upper tower is 148. 75 m, the inner radius is 153. 25 m, and the radius of the tower axis is 151 m. The main technical measures, such as the manufacture of steel tower column with large arc curve section, the lifting technology of steel tower column, and the control connection of arc tangent alignment in construction were studied. In view of the difficult problem of manufacturing and assembling steel tower due to the complicated structure of steel tower, the construction technology of curve alignment assembly of steel tower column with large size was studied. Control of top elevation and planar positioning assembly of sections T2 and below, the accuracy deviation are all not more than ± 2 mm. The assembly accuracy of segments above T2 is reduced. The vertical decreasing ratio does not exceed 1∶ 4 000.
Authors and Affiliations
Xiaomin LIU, Meng YANG, Bin LIANG
Preparation and Rapid Analysis of Oxygen-Nitric Acid Combined Oxidation of Glyoxylic Acid
Glyoxylic acid was prepared by selective oxidation of glyoxal with nitric acid and oxygen. Using single factor experiments, the effects of the oxygen delivery rate, reaction temperature, and nitric acid consumption on th...
Evaluation of Welding Fatigue of Equivalent Structural Stress Method
In order to calculate the fatigue lifetime of welding line with all directions in the space accurately in design stage, the equivalent structural stress method was used to evaluate the fatigue lifetime of tubular Tshaped...
Optimal Hour-Ahead Scheduling of Micro-Grid Considering Wind Power Uncertainty
The supply of the micro-grid was the coordination of wind power generator and fuel/gas generator.Because the wind power generation in the next hour cannot be predicted accurately, the uncertainty will largely affect the...
Research on Leakage Induced Energy Buffer Feedback Unit Based on Flyback Converter
The resistance of traditional resistor-capacitor leakage absorption circuit of high-frequency transformer was used to dissipate leakage energy, which leads to the low convertor's efficiency. In this paper, an energy buff...
Atomic Simulation of Interaction of Shear-Coupled Grain Boundary Motion with Crack in α-Iron
The interaction of shear coupled migration (SCM) with crack of tilt grain boundary (GB) Σ 9[110] (221) in α-iron was studied by using molecular dynamics simulation method.The effect of temperature and the Cr addition on...