SOLUTION HEAT TREATMENT OF ALUMINIUM 7075 BY INDUCTION HEATING
Journal Title: Tribologia - Year 2009, Vol 228, Issue 6
Abstract
The major objective of this study is to solid solution treatment of 7075 aluminium alloy by induction heating. This study was carried out in an argonium atmosphere chamber. The first step was to analyze the influence of generator power and time on the thickness of solid solution layer. The second step involved cold work of the sample and artificial ageing treatment. Additionally, the morphology and hardness profile was measured.<br/><br/>
Authors and Affiliations
Jerzy Sawicki, Łukasz Kaczmarek, Witold Staszewski, Piotr Kędzierski, Rafał Kaszewski
Keywords
Related Articles
- EP ID EP517060
- DOI -
- Views 41
- Downloads 0
THE INFLUENCE OF MODIFIED ADDITIVE ON USING PROPERTIES OF ECOLOGICAL GREASES
In this article, the investigation result on the influence of additive silica and Teflon on lubricating properties of selected lubricated compositions are presented. For modification of greases made on silica-mineral and...
AN ANALYSIS OF THE INFLUENCE OF JOURNAL’S HELICAL GROOVE ON THE WEAR AND LOAD CAPACITY OF THE SLIDING BEARING
The article presents the results of a sliding bearing with a helical groove on a journal. The studies included wear tests with contaminated lubrication oil and computer simulation of oil flow based on which the load capa...
TRIBOLOGICAL PROPERTIES OF THE STELLITE ELECTRO-SPARK DEPOSITED COATINGS
Depositing protective layers on metal surfaces frequently involves matter and energy transfer, which is accompanied by various chemical, electrochemical and electrothermal reactions. To determine the operational properti...
THE SELECTION OF PRELOAD IN ANGULAR CONTACT BALL BEARINGS ACCORDING TO THE DURABILITY CRITERION
The regulation of the preload of angular contact ball bearings is mentioned in specialist literature, but only as a practical activity carried out based on experience, still without selection methodology. At present, the...
CARBIDE LAYERS PRODUCED IN VACUUM CHROMIZING PROCESS ON STEEL SURFACE COVERED WITH NICKEL ALLOYS CONTAINING CARBIDE-FORMING ELEMENTS
In this paper duplex layers of the CrC+(Ni-W), the CrC+(Ni-Mo) and the CrC+Ni type produced on tool steel surface, in combined galvanic and vacuum chromizing processes, have been investigated. Studies of layers thickness...