THE TRIBOLOGICAL PROPERTIES OF DIAMOND-LIKE CARBON COATINGS UNDER IONIC LIQUIDS LUBRICATION
Journal Title: Tribologia - Year 2014, Vol 256, Issue 4
Abstract
This paper presents the results of TiN / a-C: H: W diamond like carbon coatings deposited using the physical vapour deposition PVD process on SW7M steel. The topography and cross-section analysis of the coatings were examined using a scanning electron microscope – SEM. Analysis of chemical composition was performed by using glow discharge spectroscopy GDOES and energy dispersive spectroscopy EDS. The tribological properties were tested using T-01M tester. In friction pairs operating under dry friction conditions, the elements coated with diamond-like carbon had better tribological properties than elements without coatings. Similar results were obtained for boundary lubrication conditions with 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIBF4) and trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)amide ionic liquids as the lubricants. The results obtained during the tests carried out indicated that the application of diamond coatings considerably improves tribological properties. Additionally the use of ionic liquids resulted in an increase in the friction properties of the systems.
Authors and Affiliations
Monika MADEJ, Dariusz OZIMINA
Keywords
Related Articles
- EP ID EP262707
- DOI -
- Views 60
- Downloads 0
ADHESION INFLUENCES ON THE PRESSURE AND CARRYING CAPACITY OF CYLINDRICAL MICROBEARINGS
This paper presents a new numerical method of hydrodynamic pressure determination in micro-bearing lubrication. We are considering the microbearing where the attained journal diameter values are about 1 millimetre and th...
THE PROPERTIES OF a-C LOW FRICTION COATINGS DEPOSITED BY PLD METHOD
In the study the results of the investigations of the properties of a-C coatings deposited by the PLD method are presented. The effect of a gaseous atmosphere of the PLD deposition process on phase composition, structure...
Analiza teoretyczno-eksperymentalna zmienności siły osiowej w połączeniach śrubowych
Przedstawiono dwie analizy rozrzutu wartości zacisku wstępnego w śrubie podczas montażu połączeń śrubowych. Analiza teoretyczna oparta jest na zmienności współczynnika tarcia, nawet dla tego samego rodzaju materiału śrub...
A WEAR ANALYSIS OF STEEL RINGS WORKINGS WITH NODULAR IRON AFTER LASER HEAT TREATMENT
The aim of the presented research was the evaluation of the wear of steel rings working with nodular iron after laser heat treatment (LHT). The wear tests were performed using a modernized friction wear tester Amsler A 1...
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE FRICTION COEFFICIENT ON STRESS DURING THE EXTRUSION PROCESS OF PERFORATED MATERIAL
Numerical analysis of stress, forces, and temperature during axisymmetrical cold extrusion of an aluminium alloy specimen was presented using Deform 3D. The rigid-plastic model was applied. The influence of a friction co...