SOME PROBLEMS OF SHIP UNDER KEEL CLEARANCE OPTIMIZATION IN THE TRANSPORT OF CARGO
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2013, Vol 2013, Issue 80
Abstract
Port water area is described by horizontal and vertical dimensions, that are designed to service of ships given size. During port exploitation it can happen of needs to service the ship greater than those was designed. Especially it regards the ships drought. This problem can be solve by reduction of under keel clearance (UKC). But it caused increasing of risk of ships strike into the ground of port water area, and in result the consequence of financial losses caused by damage of ship’s hull. The paper presents assumption of calcula-tion of optimization of ships under keel clearance in aspect of increase of ships draught ex-pected benefits and potential losses.
Authors and Affiliations
Waldemar UCHACZ, Wiesław GALOR
Keywords
Related Articles
- EP ID EP157007
- DOI -
- Views 57
- Downloads 0
ZASTOSOWANIE WIZYJNYCH METOD BADAŃ OBCIĄŻONYCH ELEMENTÓWWIRNIKOWYCH MASZYN PRZEPŁYWOWYCH DO OCENY ICH STANU TECHNICZNEGO
W artykule przedstawiono cele i założenia procesu badań nieniszczących lotniczych silników turbinowych przy użyciu metod wizualnych pośrednich, z wykorzystaniem endoskopii. Przedstawiono krótkie charakterystyki budowy ba...
THE POSSIBILITIES TO REFLECT THE OPERATIONAL CONDITIONS AND THEIR EFFECTS IN THE SELECTED ROLLING-SLIDING CONTACT
The influence of the most important operational factors, ie load, slip and speed on the tribological properties, such as wear, friction coefficient, which is the main cause of wear fatigue in the rolling-sliding. Obtain...
ANALYSIS OF TRANSITION TIMES OF PEDESTRIANS AND PASSENGERS IN AN INTERCHANGE NODE
Accurate design of infrastructure for public transport is the basis for the efficient functioning of traffic and passenger transportation. The article presents an analysis of the availability of public transport stops. T...
ENTROPY OF DISCRETE WAVELET TRANSFORM AND RADIAL NEURAL NETWORKS AS A DIAGNOSIS TOOL OF DIESEL ENGINE EXHAUST VALVE FAULT
In case of diagnosing combustion engines by vibration methods, the presence of numerous sources of vibration cannot be neglected, which are the reason for reciprocal interference of symptoms of fault. Owing to the necess...
THE POSSIBILITY OF USING LASER AND MICRO-JET TECHNOLOGY IN THE WELDING OF STRUCTURAL ELEMENTS OF VEHICLES
paper presents the possibility of laser welding using micro-jet cooling. The effect of micro-jet cooling on microstructure and mechanical properties of the weld metal deposit was carried out. New welding process was anal...