Static Friction Coefficient into Cylindrical Joints Assemblies
Journal Title: Tribology in Industry - Year 2015, Vol 37, Issue 4
Abstract
The aim of this research is to analyze the behavior of the transition between static and dynamic friction coefficient in a cylindrical joint, in order to reach high reliability when loads are acting. The friction between cylindrical contact faces is analyzed both in dry and lubricated conditions up to the moment that the assembly starts moving while tilting the entire assembly. It means that it is analyzed a complex static friction developed along a chain and its sprocket.
Authors and Affiliations
A. Todi-Eftimie , S. Bobancu , C. Gavrila , L. Eftimie
Keywords
Related Articles
- EP ID EP112054
- DOI -
- Views 97
- Downloads 0
Tribological Considerations of Cutting Fluids in Machining Environment: A Review
The paper presents a review to highlight the tribological aspects of cutting fluids in machining environment. In this study, different machining processes viz. turning, grinding, drilling and milling have been considered...
CNTs, Al2O3 and SiO2 Reinforced Epoxy: Tribological Properties of Polymer Nanocomposites
The present work studied the effect of filling epoxy matrix by different types and concentrations of nanoparticles on the friction and wear behaviors. Various concentrations (0.2 %, 0.4 %, 0.6 %, 0.8 % and 1 wt.%) of mul...
Steady State Thermo-Hydrodynamic Analysis of Two-Axial groove and Multilobe Hydrodynamic Bearings
Steady state thermo-hydrodynamic analysis of two axial groove and multi lobe oil journal bearings is performed in this paper. To study the steady state thermo-hydrodynamic characteristics Reynolds equation is solved simu...
Investigation on Tool Wear and Surface Characteristics in Hard Turning Under Air-Water Jet Spray Impingement Cooling Environment
Low cost machining puts tremendous pressure on the research in machining hardened steel compared to traditional grinding. As environmental regulations are strict enough on application of cutting fluids, a novel method ca...
The Application of Chitosan as a Modifier for Lubricating Greases Based on Vegetable Oil
The paper focuses on the influence of novel chemical additive on the physicochemical and rheological properties of novel lubricating grease compositions. The mentioned physicochemical tests revealed that the additive inf...