Stress-Strain State of a Structural Construction with Allowance for Fastening elements
Journal Title: Металлические конструкции - Year 2017, Vol 23, Issue 4
Abstract
The article presents the results of the calculation of the nodal connection of the spatial block of the structural covering of an industrial building. A detailed technique for performing the calculation of a junction connection in a spatial setting using the Lira software is described. The stages of checking the adequacy of the design scheme for the real constructive form of the node are given. Based on the results of the calculations, conclusions were drawn and the goals and objectives of the experimental study of the nodal connection of the structural coating were determined. Adequacy (mathematics) is the correspondence, the coincidence of any parameters, satisfactory from the point of view of certain goals.
Authors and Affiliations
Volodymyr Vasylev, Andrei Mironov, Anna Bezushko
Keywords
Related Articles
- EP ID EP448842
- DOI -
- Views 113
- Downloads 0
Accounting of Joint Work of Thin-Sheet Membranes with Fastening of the Stabilizer System
The article considers the existing methodology for determining the effective width of the plate when working together and reinforcing stiffener sheet membrane coating, including – the method of reduction ratios. It has b...
Comparative Analysis of the Calculation of an I-Beam Cross-Section Beam According to Eurocode 3 and SNiP II-23-81*
The article presents a comparative analysis of the beams of the I-beam cross-section according to Eurocode 3: “Steel structures” [1] and SNiP II-23-81* “Steel structures” [6]. The object of investigation was a beam of an...
Investigation of Aerodynamic Coefficients of Sagging Membrane Coatings of Engineering Structures
The publication examines the results of scientific research and regulatory documents on the impact of wind load on structures with a circular cylindrical surface, namely, vertical cylindrical tanks of large volumes. Usin...
Modeling of the Stress-Strain State of Metal Structures of the Glass Melting Furnace in Transitional States when it is Put into Operation
The article presents modeling of the stress-strain state of furnace strapping frame. It was described the method of constructing the design scheme of the bathroom glass melting furnace at its commissioning. Spatial calcu...
Studies of Efficiency of Tie Rod Usage for Masonry Wall Strengthening
In the paper the influence of nontensional horizontal steel tie rods installation in a building perimeter on vertical and horizontal deformations of bearing walls of stone buildings is considered. Buildings of large bloc...