Structure and Mechanical Characteristics of Reaction Hot Pressed Ti-B-Al Composites
Journal Title: Фізика і хімія твердого тіла - Year 2014, Vol 15, Issue 2
Abstract
Reaction hot-pressing method was developed to produce ТіВ2 – Al composites using Ті, Al, and В non-grinned powders. In-situ exothermic reaction allowed to obtain dense materials with high HV (23 GPa) and K1C (9 MPa*m1/2) at temperatures 1600 – 1800 0C during 8 minutes.
Authors and Affiliations
O. Yu. Popov, O. O. Bobryshev, V. A. Makara
Keywords
Related Articles
- EP ID EP316465
- DOI -
- Views 63
- Downloads 0
Effect of Yttrium Oxide Impurities on the Structure and Properties of Metallic Hafnium
The influence of yttrium oxide impurity content of 0 to 0.4 wt.% on the structure and microhardness metal hafniuminvestigated. It is shown that grain size decreases and the Microhardness of hafnium increases monotonicall...
Physical-Chemical Properties and Crystal-Chemical Doping Mechanisms of ZnSe Crystal by Co, Ni Transition Elements
Based on the analysis of physical and chemical properties there is made the point defect model of the doped by transition metals (Co, Ni) Selenium Zinc crystals. Based on the proposed crystal-quasichemical formulae of th...
Electrical Instability of CdTe:Si Crystals
Results of Hall effect measurements of cadmium telluride crystals, doped by silicon (dopant concentration in the melt was 1018 - 1019 cm-3), allowed to classify the studied samples and the conditions under which probably...
Modern Fiber-Optic Couplers of X-type Based on Multimode Quartz-Quartz Optical Fibers
А technique of creation of X-types passive fiber couplers has been improved. By the technique, a number of passive fiber couplers of X-types as well as an active fiber coupler of X- type based on the Mach-Zehnder interfe...
The Plasticing Effect on Structure Forming and Crystallization Processes in Polymer Blends of Polypropylene-Poly(Vinyl Alcohol)
There is one established, that glycerol’s injection in (7,0 ÷ 15,0) % of mass. amount into polymer blend of polypropylene/poly(vinyl alcohol) (PP/PVA) of mass equation 30/70 % is not changing the structure forming charac...