The Plasticing Effect on Structure Forming and Crystallization Processes in Polymer Blends of Polypropylene-Poly(Vinyl Alcohol)
Journal Title: Фізика і хімія твердого тіла - Year 2017, Vol 18, Issue 1
Abstract
There is one established, that glycerol’s injection in (7,0 ÷ 15,0) % of mass. amount into polymer blend of polypropylene/poly(vinyl alcohol) (PP/PVA) of mass equation 30/70 % is not changing the structure forming character of PP into PVA matrix: there are parts, films and external shells being formed alongside with PP fibers. When at this, during concentration increase of selective plastifier, there are PP fiber forming process into PP matrix gonna being bad, and those are consisting in average microfiber diameters and mass part of films increase. There are features of structure forming, being linked in plastifying effect of glycerol on the blend melts, and, when simultaneously with, in the those decrease of kinetical stability. There are crystallization temperature of PVA increasing, simultaneously at plasticizer content of 7,0 % of mass., and there is PP crystallization peak absent through polymer amorphization. There is crystallinity’s degree of PP decreases, through high dispersion state of polymer.
Authors and Affiliations
L. S. Dzubenko, V. P. Plavan, N. M. Rezanova, O. I. Orans’ka, O. O. Sapyanenko, P. P. Gorbyk
Keywords
Related Articles
- EP ID EP263691
- DOI 10.15330/pcss.18.1.129-133
- Views 73
- Downloads 0
Engineering of Point Defects and Formation Mechanisms of PbTe–CdTe Solid Solutions
The crystal-quasichemical formulas were proposed in paper. There were obtain the dominant point defects of Pb<sub>1-x</sub>Cd<sub>x</sub>Те solid solutions on the base of initial binary solutions PbТе and CdTe of the n-...
Impedance Response and Photodielectric Properties of Nanoporous Silica Matrices with Encapsulated Rhodamine-C and Rhodamine-6G
The results of research of performance of porous silica matrix MCM-41 with encapsulated into its pores dye rhodamine C or rhodamine 6G were presented. The character of changes in the frequency dispersion of the impedance...
Heat Сapacity and Debye Temperature of CdTe, CdSe Crystals
Based on the results of ab initio quantum-chemical calculations of the crystal structure of molecular clusters the temperature dependence of the specific heat of CdTe and CdSe crystals at constant volume CV and constant...
Effect of pH of the Reaction Mediumon the Structure and Properties of Spinel-Type Ferrite Nanopowder
In this work using sol-gel auto-combustion synthesis was synthesised single-phase magnesium-substituted lithium ferrite at different pH reaction medium. The synthesized materials were investigated by X-ray and Mossbauer...
Methods of Heat Capacity Measurements of Crystal (Review)
The analysis of the basic methods of heat capacity measurements of solids and construction schemes of devices for implementation these techniques have been shown. The general theoretical and empirical formulas allow to q...