Study for Evaluation and Optimization of Mineral Composition and Structure of Iron Ore Granulation in Sintering Process
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 2
Abstract
The characterization of iron ore particles is of vital importance for the study of mineral composition. The specific surface area of iron ore particles can be measured by laser diffraction, and mathematical models (based on the size distribution). Particle size fractions and chemical composition were determined of several types of iron ore (symbolically marked A, B, C, D, E, F). These features have direct influence on the sintering process by particle size analysis, permeability, reducibility, porosity, CaO/SiO ratio, influence of MnO in sinter. The granulation experiment show that these minerals (more than 50% with diameters of <1mm) can be successfully used in the sintering process, or by alloying with other minerals in Europe. Large irregularly shaped and adhesive particles can get a higher efficiency of granulation easily. The usage of iron ore with big and rough particles can improve the permeability while the iron ore with smooth and sphere particles has poor ability of granulation.
Authors and Affiliations
Paul Petruș MOGOȘ, Nicolae CONSTANTIN, Sinziana ITTU, Denisa Elena ANCA, Lavinia Marilena HARCEA
Keywords
Related Articles
- EP ID EP619311
- DOI -
- Views 73
- Downloads 0
Obtaining and Characterization of Vitroceram by Chemical Doped ZnO for Art Mosaic
This paper presents the obtaining and the characterization of ZnO doped vitroceramic, used as photo and termoresistive pigment for art mosaic. The coprecipitation involves two sequential steps, first of ions Zn2+(aq), Cr...
Contributions Regarding the Development of New Types of Solar Actuators
The paper presents the authors’ contributions to the development of solar actuators with bimetallic band and Bourdon tube in the EMAD Research Centre of ”Ștefan cel Mare” University of Suceava. The solutions and the expe...
Contributions to Increasing the Quality of Urban Life Through the Use of an Intelligent Road Traffic Management System
Traffic congestion is a phenomenon which occurs when road traffic is disturbed. In Galati city, traffic congestion increases rapidly due to an increase in the number of vehicles on the road. This work is an attempt to an...
Researches Regarding the Elements Loss through Vaporization during the Elaboration Process in LD Converter
The paper presents a series of researches regarding the vaporization of the component elements of the metallic bath and slag during refining in LD converter. Also, the main factors which influence the vaporization proces...
The Monitoring of Chattering in Cold Rolling Mill System With Five Stands for Thin Strip
Each system (stand – driving) and the continuous rolling line to which it belongs have its own functional and energetically parameters. To reduce any faults of the strip surface it is also necessary to check (eventually...