Studying the physicalchemical transformations at resourcesaving reduction melting of chrome–nickelcontaining metallurgical waste
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 12
Abstract
<p>We have investigated the physicochemical characteristics of chromium-nickel-containing waste from the production of corrosion-resistant steels and a doped alloy obtained by reduction smelting. This is necessary to determine the parameters that reduce the losses of Ni and Cr during the processing of doped oxide raw materials and using the resulting dopant. It was determined that the alloy with the O/C ratio in the charge in the range of 1.09–1.78 had the γ-Fe and Fe<sub>3</sub>C phases with alloying elements as substitutional atoms. At O/C=1.78, the phase composition predominantly consisted of γ-Fe with a weak manifestation of Fe<sub>3</sub>C. A phased O/C change in charge of 1.33 and 1.09 resulted in an increase in the emergence of Fe<sub>3</sub>C on diffractograms. The microstructure of the chrome-nickel-containing corrosion-resistant steels scale mixture is disordered with the presence of particles of different sizes and shapes. The content of the alloying elements Ni and Cr was 7.65 % wt. and 14.26 % wt., respectively, at the oxygen content at the level of 29.70 % wt. The microstructure of the doped alloy with a different O/C ratio in the charge had a clear manifestation of several phases, characterized by differences in the content of the main alloying elements. The Ni content in the studied areas of different phases varied within 1.41–20.90 % wt., Cr ‒ 1.27–32.90 % wt. According to research, the most acceptable O/C ratio in the charge is 1.78. In this case, reduction was achieved with predominance in the phase composition of γ-Fe with a relatively weak manifestation of residual carbon as the carbide component. In other words, we have determined the indicators for the processing of chromium-nickel-containing industrial wastes and the production of a doped smelting product with a relatively low carbon content. This expands the possibilities of resource saving using the obtained alloy with the replacement of a certain proportion of standard alloying materials in the smelting of carbon-limited steel grades.</p>
Authors and Affiliations
Artem Petryshchev, Dmitry Milko, Viacheslav Borysov, Bohdan Tsymbal, Ihor Hevko, Svitlana Borysova, Andrii Semenchuk
Keywords
Related Articles
- EP ID EP666364
- DOI 10.15587/1729-4061.2019.160755
- Views 54
- Downloads 0
Experimental study of the effect of nanoparticles of ТiO2 on the thermophysical properties of the refrigerant R141b
<p>The results of the experimental study of the thermophysical properties of the R141b refrigerant, R141b/Span-80 surfactant solution and R141b/Span-80 surfactant/TiO<sub>2</sub> nanoparticles nanofluid are presented. Th...
Effect of a flameretardant coating on the burning parameters of wood samples
<span lang="EN-US">The studies of influence of wood fire protection on ignition have established parameters of flame propagation and combustion suppression which makes it possible to influence this process. It was proved...
Improving the diagnostics of underground pipelines at oilandgas enterprises based on determining hydrogen exponent (PH) of the soil media applying neural networks
<p>A set of key parameters and information flows has been formed to simulate stages of probing the outside surface of underground metal pipelines (UMP) taking into account pH of the soil contacting with the pipe metal.</...
Aloe vera as cutting fluid optimization using response surface method
<p>The fluid of vegetable Aloe Vera has characteristics as a cutting fluid, Aloe Vera cutting fluid (AVCF) has an excess of environmental reduction effects from oil-based cutting fluid (OBCF). Surface Response Methodolog...
Development of methodology for modeling the interaction of antagonistic agents in cybersecurity systems
<p>The basic concepts that form the basis of integrated modeling of the behavior of antagonistic agents in cybersecurity systems are identified. It is shown that the emphasis is largely on modeling the behavior of one of...