SYNTHESIS AND CHARACTERIZATION OF NANO HYDROXYAPATIE WITH POM AND PVP NANOCOMPOSITE USING FOR BONE TISSUE ENGINEERING
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 4, Issue 8
Abstract
n recent years, several kinds of polymer – hydroxyapatite nano composites have been developed as bone substitute materials. The purpose of making such composites is to reinforce the polymer and improve the bone bonding properties of the materials, since it has been found that adding hydroxyapatite into a polymer matrix (POM with PVP). Therefore, there is a growing need for the development of nanocomposites with biocompatibility an d bioactivity. Comparisons with pure nHAp/polymer matrix prepared by wet chemical precipitation method. The main goal is to highlight the efforts of the introduction of polymers on the physicochemical properties, morphology and biocompatibility for applica tions in bone surgery.
Authors and Affiliations
P. Sakt
Keywords
Related Articles
- EP ID EP148366
- DOI -
- Views 49
- Downloads 0
A TECHNICAL REVIEW OF PEAK TO AVERAGE POWER RATIO REDUCTION IN MIMO-OFDM
In this paper, detailed review of bit error rate (BER) and peak to average power ratio (PAPR) reduction in multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) and performance...
Partially Ordered Metric Space using Fixed Point Theorems
[b]Fixed point theory is an accurate topic of nonlinear analysis. Also, it is well known that the contraction mapping principle. From last four decades, this theorem has undergone various generalizations either by...
SUBCONTRACTOR PERFORMANCE, EVALUATION AND RATING
Main contractors have shifted their attitudes about subcontract procurement to more strategic and long-term partnering philosophies. A case study was conducted to evaluate the framework with subcontracting strateg...
MEASUREMENT OF INTERNAL CONVERSION COEFFICIENT Of 280kev γ – RAYS IN 203Hg
The measurement of the internal conversion coefficient of 280keV γ – ray in 203HG have been investigated by means of calibrated 2ʺ x 2ʺ NaI(Tl)(scintillation detector which is sodium iodide activated with smal...
DESIGNING A DUAL AXIS SOLAR TRACKING SYSTEM FOR MAXIMUM POWER
The main purpose of this paper is to present a control system which will cause better alignment of Photo voltaic (PV) array with sun light and to harvest solar power. The proposed system changes its direction...