Synthesis and Spheroidization of Disperse High-Melting (Refractory) Powders in Plasma Discharge
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 3
Abstract
One of the areas of using arc and radio-frequency induction (RFI) plasma in metallurgy is to obtain refractory metals and materials with spherical shape of particles. The main advantages of using spherically shaped particles are high purity of particle surface, high bulk density (minimum surface/volume ratio) and ability to gain control on porous article properties and to separate the particles in fractions. Spherical particles are needed in the formation of powder-metallurgy elements with desired and uniform porosity, which are operated at high temperature, in highly aggressive media and at high velocity fluid flows. The present work considers the possibilities of using arc and RFI-plasma in metallurgy to obtain high-melting point metals and materials with spherical shape of particles.
Authors and Affiliations
Rositsa GAVRILOVA, Viktor HADZHIYSKI
Keywords
Related Articles
- EP ID EP627347
- DOI -
- Views 80
- Downloads 0
Dual Priority Scheduling Algorithm Used in the nMPRA Microcontrollers – Dynamic Scheduler
This paper is a follow up of an already published paper that described the static scheduler. It deals with a true dynamic scheduling algorithm that is meant to maximize the CPU utilization. The dual priority algorithm is...
The Analysis of a Workplace From an Ergonomically Criterion. Case Study: Preliminary Charge
This paper presents a practical method of analyzing a wokplace from an ergonomically criterion based on an "ergonomic analysis questionnaire", and, also, the conclusions and proposed measures in order to improve the acti...
Hardening of the Grey Cast Iron through the Vibrating Electrode Method Using a WC Electrode and in Combination with TiC and Ti Electrode
There have been tested samples of grey cast iron, the hardening being made through WC coating through the vibrating electrode method with a layer, two layers and through double layers combined with Ti and TiC. Besides do...
Behavior of Cold Rolling Emulsions in the Obtaining Process of Steel Strips
The research was focused on determining an optimum rolling emulsion to be used on a cold rolling mill from Galfinband Galati Romania. In this plant are obtained steel strips with the thickness of 0.7-0.8 mm. The main par...
Tribocorrosion – Insight into Material Degradation in Specific Environments
Tribocorrosion is an irreversible surface degradation mechanism of a metallic and/or non-metallic material as a result of its physicochemical and mechanical interactions during relative motion (friction, sliding, impact,...