Synthesis, Characterization and Computation of Potassium Doped Calcium Hydroxide nanoparticles and nanotubes
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
Potassium doped calcium hydroxide [Ca(OH)2:K] nanoparticles were synthesized by simple precipitation method. The powder x-ray diffraction pattern of the sample was studied, to investigate the crystalline nature of the sample. The shape and size of the nanoparticles were measured by scanning electron microscopic (SEM). The functional groups presented in the synthesized particles were recorded and analysed in the spectral region of 4000-400cm-1by Fourier-transform infrared spectroscopy. Optical Properties of [Ca(OH)2:K] were determined by ultraviolet visible spectrometer in the range of 190 – 800 nm. In addition that to study insight of the Ca(OH)2 nano material, a nanotube was constructed and studied a quantum chemical calculations to predict the geometry, Dynamic and band gap properties.
Authors and Affiliations
D. Nandhini, S. Subashchandrabose, P. Ramesh, K. Sakthipandi
On Tribological Behavior of Synthetic Fiber Reinforced Polymer Composites Modified With Fillers: A Review
Polymer composites reinforced with fibers have been consistently employed in applications involving friction in many industrial components. Though natural fibers possess many advantages, they absorb greater moisture and...
AN IDENTIFICATION OF THE BEST MIXTURE COMPOSITION FOR THE JOULE-THOMSON REFRIGERATOR OPERATING AT 90 K
In recent days researchers have been trying to operate Joule-Thomson refrigerators with mixed refrigerants instead of single refrigerant as operating fluid. Usage of mixtures in the place of single refrigerant is increas...
SWCNTs - Water on Carreau MHD Flow up a Wall with Distinct Thickness
This study was conducted to investigate the effects of several parameters in the Navier - Stokes equations describing the nanofluid flow subjected to different electric fields. The boundary layer of SWCNTs – water flow o...
Effect of Sintering Temperature on Mechanical Properties of Mg-Zr Alloy
Magnesium, Zirconium alloy is developed in three different sintering temperatures through powder metallurgy technique followed by hot extrusion in this work. The application of this material is for orthopedic implants. M...
Performance Evaluation of VCR CI Engine Using C-D Intake Manifold With Internal Grooving
Compression ratio (CR) is a design parameter that influences efficiency, characteristics as well as emissions from the engine. Varying of Compression Ratio is done to increase fuel efficiency under varying loads. The exp...