Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House
Journal Title: Journal of Agricultural Machinery - Year 2023, Vol 13, Issue 3
Abstract
IntroductionIn the poultry industry, reducing energy consumption is essential for reducing costs. Energy requirements in the poultry industry include heating, cooling, lighting, and power line energy. Identifying factors that increase energy usage is crucial, and providing appropriate solutions to reduce costs and energy consumption is inevitable. One of the major and expensive factors in the poultry industry is the use of fossil fuels, which also causes pollution. Energy costs directly impact the cost of production and increase the per capita cost of production in the meat and egg sectors. In Iran, poultry farms are among the most widely used energy consumers, especially for heating breeding halls, making them a significant subset of the agricultural sector.Materials and MethodsThe problem under study is the thermal simulation of a meat poultry farm located in Ardestan city, Isfahan province. Ardestan city is situated in a desert region in the north of Isfahan province, at a latitude of 33 degrees and 23 minutes north, and a longitude of 52 degrees and 22 minutes east. The dimensions of the poultry hall floor are 5 meters by 8 meters, and it has a capacity of 300 poultry pieces. There are two inlet air vents (windows), each with dimensions of 1.90 by 1.6 meters. The roof has an average height of 2.5 meters and is sloping, made from a combination of plastic carton, fiberglass, and sheet metal.To reduce energy consumption in this poultry farm, a solar heating system is designed and studied in this research. The farm is one of the functions of Isfahan province, with dimensions of 8 meters in length and 5 meters in width. The simulation is performed using TRNSYS software.Results and DiscussionThe results demonstrate that a collector surface area of 26 m2 is necessary to reach the technically optimal point, where the sun's maximum production is achieved with no energy dissipation. Furthermore, the findings indicate that a balance of 16 m2 is required to align the solar system with the auxiliary system.ConclusionBy installing 2 square meters of solar collectors, 5.2% of the total energy demand can be met with solar energy. To fully meet the energy demand using solar energy, a collector area of 30 square meters is required. As the solar fraction increases, the system's ability to extract solar energy also increases. The maximum production of solar energy without any wastage is achievable with a collector area of 26 square meters. Moreover, to maintain a balance between the use of solar energy and the auxiliary system, a collector area of 16 square meters is needed.
Authors and Affiliations
M. Jalali,A. Banakar,B. Farzaneh,M. Montazeri,
Keywords
Related Articles
- EP ID EP720711
- DOI https://doi.org/10.22067/jam.2022.75172.1090
- Views 41
- Downloads 0
Effect of Farm Size on Energy Consumption and Input Costs of Peanut Production in Guilan Province of Iran
In this study, the energy and economic analysis of peanut production in Guilan province of Iran was studied. Data were collected from questionnaires of 75 farmers. The data were collected from three farm size categories...
Effect of Chitosan Coating on Physical, Mechanical and Chemical Properties of Grapes during Storage
Introduction Grape fruit set its fruits and shortly after planting and due to high nutritious value and excellent food quality has been welcomed by many people in the world, but considering its soft tissue and high softe...
Investigating the Energy Consumption and Economic Indices for Sweet-Cherry and Sour-Cherry Production in Northeastern Iran
The aim of this study was to investigate the energy consumption and production costs of sweet-cherry and sour-cherry in Northeastern Iran. Required data were collected from 75 sweet-cherry and 42 sour-cherry producers. T...
Study of Changes in Rheological Properties of Potato Tissue During Storage Using the Creep Test
The changes in viscoelastic properties of potatoes (Tubuls Agria) stored at 4 ËC for 4 months were modeled and evaluated by using the creep-recovery test. Cylindrical specimens with 15 mm in diameter and 35 mm long were...
Effect of Infrared Drying on Drying Kinetics and Color Changes of Wild Sage Seed Mucilage
In this study, the effects of infrared (IR) dryer system parameters such as IR power, the distance of mucilage from lamp surface, mucilage thickness on drying kinetics and, color indexes (L*, a*, b* and ÎE) of wild sage...