TEMPERATURE OF THE TOP LEVEL SURFACE OF PARTS OF AGRICULTURAL SOIL TILLING MACHINERY. PART II – THERMOVISION MEASUREMENTS
Journal Title: Tribologia - Year 2015, Vol 260, Issue 2
Abstract
Using a thermal camera, the temperature distribution of the surfaces of ploughshares, subsoil shanks, and cultivator tooth coulters was determined. These parts worked in soil conditions during operation in the field. The ploughshares’ temperature distribution was more diverse than subsoil shanks and cultivator tooth coulters. The front parts of the ploughshares had the highest temperature (in particular soil tillage with low moisture ~ 8.4%). This shows a heavy load from the ground. Moreover, the subsoil shanks, and cultivator tooth coulters’ temperatures were similar with a slight increase of the half-length their parts.
Authors and Affiliations
Piotr KOSTENCKI, Tomasz STAWICKI, Paweł SĘDŁAK
Keywords
Related Articles
- EP ID EP258922
- DOI -
- Views 32
- Downloads 0
THE INFLUENCE OF LUBRICATION ON VIBRATIONS AND THE THERMAL STATE OF THE TRANSMISSION GEAR OF A BELT CONVEYOR DRIVE
The paper presents the results of the examination of the influence of lubricating oil viscosity on the vibration level of a two-stage gear transmission working in a belt-conveyor power transmission system. Three classes...
MODELLING THE EFFECT OF THE USE OF ROLLERS ON THEIR WEAR
An important factor in the proper operation of a mill is the appropriate planning conditions of exploitation rollers, because this factor is the limiting element in the production process. The article presents a set of o...
ASSESSMENT AND ANALYSIS OF IMPREGNATED TRIBOLOGICAL SYSTEMS WORKING AT ELEVATED TEMPERATURES
With emphasis on the reduction of frictional resistance and tribological wear of machine component parts, it becomes more and more important, in order to improve their efficiency, durability and reliability. Friction cau...
EFFECT OF APPLYING FLUSHING FLUID ON LUBRICITY PROPERTIES OF REFRIGERANT COMPRESSOR OILS
here has currently been a dynamic return to applying natural refrigerants such as hydrocarbons. They are substances containing neither fluorine nor chlorine, which contribute to the enlargement of the ozone hole and the...
ANALYSIS OF THE WEAR PROCESS OF HARDFACING LAYERS IN SANDY CLAY ABRASIVE MASS
The paper examines the processes of wear occurring in the layers obtained by the welding of materials based on Fe-Cr-C, containing the transitional elements V, Nb, Mn, and W and tungsten carbide during friction in sandy...