THE CHANGE OF FRICTION AND LOAD- CARRYING CAPACITY OF THE JOURNAL BEARING WITH THE CONSIDERATION OF THE OIL AGEING
Journal Title: Tribologia - Year 2016, Vol 269, Issue 5
Abstract
This paper presents numerical calculations of the hydrodynamic pressure distribution, carrying capacity, and friction coefficient in the gap of a journal bearing. The analysed bearing is lubricated using motor oil. In this paper, oil ageing and temperature influence on viscosity are taken into account. Viscosity changes in the pressure and shear rate are not considered. These changes will be considered in other papers. For the hydrodynamic lubrication analysis, laminar flow of the lubrication fluid and non-isothermal lubrication model of the journal bearing were assumed. As the constitutive equation, the classical, Newtonian model was used. This model was extended by the viscosity changes in temperature and exploitation time. For the considerations, the cylindrical journal bearing with the finite length and smooth bearing, with the full angle of wrap were taken.<br/><br/>
Authors and Affiliations
Grzegorz SIKORA, Andrzej MISZCZAK
Keywords
Related Articles
- EP ID EP242337
- DOI 10.5604/01.3001.0010.6698
- Views 77
- Downloads 0
AN ESTIMATION OF THE INFLUENCE OF THE SUBSTRATE PREPARATION ON TRIBOLOGICAL PROPERTIES OF NANOCERAMIC OXIDE LAYERS
The article presents the results of tribological measurements of an aluminium oxide layer, obtained on aluminium alloy substrate with different degrees of surface preparation, with a plastic material in sliding cooperati...
Optymalizacja parametrów geometrycznych kół zębatych w aspekcie minimalizacji naprężeń kontaktowych
Koła zębate jako podstawowe elementy wchodzące w skład każdej przekładni zębatej, tworzącej układ napędowy maszyny roboczej, czy dowolnego pojazdu samochodowego narażone są przede wszystkim na naprężenia kontaktowe boku...
Badania odporności erozyjnej wybranych materiałów
W pracy analizowano wpływ właściwości mechanicznych Re, Rm, i KC stali 51CrV4 i 42 CrMo4 stosowanych w młynach wirnikowych na odporność erozyjną κ przy kątach padania strumienia ścierniwa 30°, 60° i 90°. Badania potwierd...
THE MECHANISM OF THE WHITE LAYER FORMATION IN THE CASE OF THE WEAR OF TOOLS DURING THE FORMING OF STEEL STRUCTURAL PARTS
Hot or warm forging of steel structural parts favors the formation of the white layer on the surface of steel tools. The formation of the white layer is the result of tribological processes, and phase transformations in...
THE INFLUENCE OF SURFACE FREE ENERGY ON TRIBOLOGICAL PROPERTIES OF OXIDE LAYER S FORMED ON ALUMINIUM ALLOY EN AW-5251
This paper presents the influence of the parameters of the formation of oxide layers on the surface free energy and the tribological properties of these layers. The layers were formed electrochemically on aluminium alloy...