THE INFLUENCE OF SURFACE FREE ENERGY ON TRIBOLOGICAL PROPERTIES OF OXIDE LAYER S FORMED ON ALUMINIUM ALLOY EN AW-5251
Journal Title: Tribologia - Year 2018, Vol 280, Issue 4
Abstract
This paper presents the influence of the parameters of the formation of oxide layers on the surface free energy and the tribological properties of these layers. The layers were formed electrochemically on aluminium alloy EN AW-5251, with variable values of electrolyte temperature and current density. A three-component electrolyte was used to produce oxide layers. The surface free energy was determined by the droplet deposition method by measuring the wetting angles, while the van Oss-Chaunhury-Good method was used for the calculations. Tribological tests were performed on a T-17 tribological tester under conditions of technically dry friction for reciprocating motion. T7W composite was used as a specimen in tribological tests.<br/><br/>
Authors and Affiliations
Mateusz NIEDŹWIEDŹ, Marek BARA, Władysław SKONECZNY
Keywords
Related Articles
- EP ID EP414835
- DOI 10.5604/01.3001.0012.7536
- Views 46
- Downloads 0
A TRIBOLOGICAL TEST RIG FOR FIBRES, CABLES, AND PLAITINGS
The paper presents a description of the mechanical construction, measuring and control systems and the possibilities of a new type tribological testing device. The design was developed and built at the Department of Fund...
EVALUATION OF SELECTED PROPERTIES OF A SURFACE LAYER AFTER MILLING USING INSERTS WITH DIFFERENT COATINGS
The article presents a comparison of results of measurements of the geometrical structure of milled surfaces with inserts with different coatings. The study was done on a vertical milling centre. The first step was to de...
BADANIE WPŁYWU STOPOWANIA LASEROWEGO WARSTWY WIERZCHNIEJ NA ODPORNOŚĆ NA ZUŻYCIE ŚCIERNE ELEMENTÓW Z ŻELIWA
Celem badań była ocena wpływu stopowania laserowego stopek redlic pracujących w medium piaszczystym na intensywność ich zużycia ściernego. Obróbkę przeprowadzono za pomocą duo diodowego urządzenia laserowego TRUDISK 1000...
ELECTRON SPIN RESONANCE (ESR) SPECTRA OF BUTYLATED HYDROXYTOLUENE (BHT) AS EVIDENCE OF FREE RADICAL FORMATION IN ELECTROSTATIC DISCHARGE (ESD) DAMAGED LUBRICATING OILS
Electrostatic discharges were generated in typical ISO VG 46 cSt turbine lubricating oil by passing the oil through a glass fibre filter element at a hydraulic load of 0.06 L*min-1*cm-2. The oil exhibited electrical cond...
EVALUATION OF THE USEFULNESS OF SOME POST REFORMING WASTE OF RAPESEED OIL TO OBTAIN BIOADDITIVES BY BIOCHEMICAL METHODS
The opinions of the usefulness of the post-refining products of rapeseed oil and the biochemical methods of the processes to extract ecological lubricating additives were investigated. The results of conducted investigat...