The estimation of ability to reclame of moduling sands with biopolymer binders
Journal Title: Archiwum Odlewnictwa - Year 2011, Vol 11, Issue 2
Abstract
Applied up till now organic binding materials, on the basis of synthetic resins are characterised by good technological properties, but cause high emission of harmful substances. That’s why contemporary scientific researches are leading to progressive replacing the binders obtained from petrochemical materials with polymer biocomposites coming from renewable resources. Increasing concern of aliphatic polyesters such as polylactide, polycaprolactone, poly(hydroxyalkanoates) and aliphatic-aromatic polyesters is caused by the possibility of using them for producing many biodegradable products. In that context it is important to expand the researches connected to using biopolymers as moulding sands binders. Contemporary authors’ papers were focused on technological properties and harmfulness for the environment of this ecological moulding sands. TThis article takes into consideration the ability to reclamation of moulding sands with biopolymer binders.T
Authors and Affiliations
K. Major-Gabryś, St. M. Dobosz, R. Dańko, J. Jakubski
Keywords
Related Articles
- EP ID EP72437
- DOI -
- Views 116
- Downloads 0
Effect of modification and cooling rate on the macrostructure of IN-713C alloy
The results of investigations of the effect of modification and cooling rate on the macrostructure of castings made from IN-713C nickel superalloy were described. As a modifier, cobalt aluminate CoAl2O4 in composition wi...
Evolution of Mg-5Al-0.4Mn microstructure after rare earth elements addition
Mg-5Al-0.4Mn-xRE (x = 0, 1, 2, 3 wt.%) magnesium alloys were prepared successfully by casting method. The microstructure was investigated by light microscopy. The influence of rare earth (RE) elements on the area fractio...
Studies of selected mechanical properties of nitinol – shape memory alloy
Because of their specific properties, shape memory alloys are applied in many domains. The investigations were conducted on nitinol alloy in the form of 3,1 mm diameter wire, whose Af temperature as stated by the manufac...
Weld microstructure in cast AlSi9/SiC(p) metal matrix composites
Welded joint in cast AlSi9/SiC/20(p) metal matrix composite by manual TIG arc welding using AlMg5 filler metal has been described in his paper. Cooling curves have been stated, and the influence in distribution of reinfo...
The solidification during flow of composite suspension in the permanent mould
The presented work presents the influence of graphite particles on the solidification kinetics of metal suspension based on AlSi10Mg alloy during the die cavity filling. In order to examine this problem, the measurements...