THE IMMERSION OF ACRYLIC RESIN WITH INJECTION MOULDING TECHNIQUE ON LOOSE DENTURES DIMENSIONAL CHANGE
Journal Title: Journal of Vocational Health Studies - Year 2019, Vol 3, Issue 1
Abstract
Background: Acrylic resin is the most commonly used denture base material. One disadvantage is that it can absorb water that can cause changes in dimensions. Changes in the dimensions of acrylic resin are influenced by processing acrylic resin. At present injection molding techniques are known to be better than compression molding. Dimension changes due to water absorption occur in the first 7 days and interval intervals of up to 12 days. Purpose: this study was to determine whether immersion of acrylic resin with Injection molding techniques had an effect on changes in dimensions. Method: The study was conducted on acrylic resin test rods with a size of 25 mm x 25 mm x 5 mm. by using injection molding techniques. Acrylic resins are immersed in water for 24 hours, 48 hours and 12 days. Changes in dimensions are measured using a caliper with an accuracy of 0.01 mm. Statistical analysis was performed using the normality test, homogeneity test, and ANOVA test. Results: this study found that there was no change in dimensions of acrylic resin with water-immersed injection molding techniques 24 hours, 48 hours and 12 days. Conclusion: That immersion of acrylic resin in water at 24 hours, 48 hours, and 12 days with injection molding techniques did not affect changes in dimensions.
Authors and Affiliations
Endang Kusdarjanti, Mia Laksmi L. , Okti Setyowati
Keywords
Related Articles
- EP ID EP639604
- DOI 10.20473/jvhs.V3.I1.2019.6-10
- Views 178
- Downloads 0
MANUFACTURING TECHNIQUE OF METAL CERAMIC RESTORATION WITH IMPLANT-ABUTMENT AT GINGIVAL RESORPTION CASE
Background: The low levels of patient satisfaction and confidence in the restoration of the gingival resorption results in impaired quality of life in both functional and psychosocial aspects. It is necessary to manufact...
INHIBITORY ACTIVITY OF ZINGIBER OFFICINALE VAR RUBRUM EXTRACT AGAINST STAPHYLOCOCCUS AUREUS
Background: gram-negative bacteria-salmonella typhi and gram-positive bacteria-staphylococcus aureus are types of bacteria that cause infectious disease among several areas in Indonesia. Staphylococcus aureus often found...
THE IMMERSION OF ACRYLIC RESIN WITH INJECTION MOULDING TECHNIQUE ON LOOSE DENTURES DIMENSIONAL CHANGE
Background: Acrylic resin is the most commonly used denture base material. One disadvantage is that it can absorb water that can cause changes in dimensions. Changes in the dimensions of acrylic resin are influenced by p...
FRACTIONAL ANISOTROPY AND MEAN DIFFUSIVITY VALUE IN 2ND GRADE OF DEGENERATIVE CERVICAL CANAL STENOSIS
Background: By using T2 weighted image (T2WI) of Magnetic Resonance Imaging (MRI), a radiologist can classify degenerative cervical canal stenosis (DCCS) into three grade, but there is no correlation between stenosis cla...
OBTURATOR FABRICATION WITH MAGNET ATTACHMENT
Background: Development of science and technology led to people having birth defects (congenital), trauma or because of there sected tumor can be made of a prosthesis. Purpose: To learn the technique of making obturator...