The impact of the pine annual ring width on the screw withdrawal resistance
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 96, Issue 1
Abstract
This paper presents investigation of the impact of the pine wood (Pinus sylvestris L.) annual ring width on the screw withdrawal resistance. For tests samples made of 2-layer laminated pine wood were used: Solid lam and Lam FJ. Samples made of Solid Lam were divided on to the three sets with different annual ring width: slow a. r. w. 0.64-2.5mm, medium a. r.w. 2.5-3,5mm and fast a. r. w. 3.5-4.6mm. Samples made of Lam FJ varied in annual growth ring. Screws used in industry practice were screwed in tested samples. The screw withdrawal resistance were determined using empiric method according PN_EN 1382:2000. Characteristic screw withdrawal resistance were calculated according Eurocode 5. Correlations withdrawal resistance and wood density were determined for each wood sample set and for all samples. As a result of test it was found that for all samples coefficient of correlation of withdrawal resistance and wood density was 0.71. and it was found that growth ring width does not influence withdrawal resistance and the differences between average values are not statistically significant for the same class of wood. Tested pine wood fulfils the requirements of Eurocode 5. Keywords:
Authors and Affiliations
ANDRZEJ TOMUSIAK, MAREK GRZEŚKIEWICZ
Keywords
Related Articles
- EP ID EP362318
- DOI -
- Views 55
- Downloads 0
The effect of long-time storage of PRF resin on its physical and chemical properties
The effect of long-time storage of PRF resin on its physical and chemical properties. Phenol- resorcinol-formaldehyde resin was subjected to 21-month storage and its physical and chemical properties, as well as bondline...
Screw withdrawal capacity and lateral resistance in wood-PP composites exposed to low temperature
Screw withdrawal capacity and lateral resistance in wood-PP composites exposed to low temperature. The results of tests on the withdrawal capacity and lateral resistance of screw fasteners embedded in wood-polymer compos...
Effect of wood flour type on tensile properties of wood-polymer composites
Effect of wood flour type on tensile properties of wood-polymer composites. The aim of the study was to evaluate the effect of wood flour type on the mechanical properties in tension for two wood-polymer composites: one...
The effect of tree slenderness on wood properties in Scots pine. Part I: Basic density and compression strength parallel to grain
The effect of tree slenderness on wood properties in Scots pine. Part I: Density and compression strength parallel to grain. The aim of this study was analyse the variability in basic density (Qbd) and compression streng...
The impact of the drying process on the deformation of the beech and oak wood samples
The influence of the drying process conditions on the deformation of the beech and oak wood. The results of the deformation of beech wood (Fagus sylvatica L.) and oak wood (Quercusrobur) after drying process are presente...