THE INFLUENCE OF ADDITIVE TECHNOLOGY ON THE QUALITY OF THE SURFACE LAYER AND THE STRENGTH STRUCTURE OF PROSTHETIC CROWNS
Journal Title: Tribologia - Year 2018, Vol 280, Issue 4
Abstract
Prosthetic crowns reproduce the damaged hard structures of the patient’s own teeth and take over their natural functions, thus securing the correct reconstruction of the stomatognathic system. The aim is to evaluate the crowns for premolars and molars produced by casting, milling, and Selective Laser Melting technologies, in terms of the accuracy of reproducing the degree against the prosthetic pillar, the analysis of the surface layer structure of the step, and the micromechanical parameters of the alloy. The study material included CoCrMo alloy crowns. The conducted study allowed finding that the tightness of prosthetic crowns made using traditional casting technology as well as in SLM milling and technology is comparable and meets clinical requirements. Structural crown analyses confirmed the very good quality of the surface layer obtained with milling technology and SLM technology using the CAD/CAM method. SLM and digital milling allow the formation of precise and durable structures constituting the foundation of crowns in a time much shorter than the casting process.<br/><br/>
Authors and Affiliations
Łukasz BOJKO, Wojciech RYNIEWICZ, Anna M. RYNIEWICZ, Marcin KOT, Paweł PAŁKA
Keywords
Related Articles
- EP ID EP413434
- DOI 10.5604/01.3001.0012.7480
- Views 21
- Downloads 0
THE INFLUENCE OF MODIFYING ADDITIVE ON THE BASIS OF POLYMER AND SILICA AND MECHANICAL FORCE ON PHYSICOCHEMICAL PROPERTIES OF ECOLOGICAL GREASES
This article presents the investigation results of the influence of developed additive AR (silica and polymer) on the physicochemical properties of selected lubricated compositions made on mineral basis with lithium thic...
FRICTION RESISTANCE IN SLIDE/ROLL MOTION FOR CHOSEN POLYMERS AGAINST STEEL
The paper describes the study of polymer-steel sliding pairs during slip-roll motion. The analysis focused on the frictional forces at various rolling to slip ratios. The kinematic parameters of the friction node were th...
DETERMINATION OF THE FRICTION COEFFICIENT IN THE FOIL-ROLLER COMBINATION
In order to verify and select the appropriate materials for cooperation in high-speed foil bearings in the particular tribological pair, a series of friction and wear tests of selected material pairs were carried out. Th...
INVESTIGATION OF SLIDING PROPERTIES OF SELECTED PLASTICS AND GREASES APPLIED FOR ELEMENTS OF WINTER SPORT EQUIPMENT
The article presents the results of friction coefficient measurements of selected polymer materials applied for elements of winter sports equipmentsliding against ice. After testing, one of thematerials, polyethylene, wh...
INFLUENCE OF SURFACE LASER TEXTURING ON FRICTION AND WEAR OF PTFE DURING SLIDING AGAINST STEEL
The paper presents research and analysis of PTFE wear during cooperation with steel. The surface of steel elements was subjected to laser texture. Three different patterns of texture were applied to the surface of steel...