The influence of austenitization temperature on the anizothermal eutectoid transformation of spheroidal cast iron
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 3
Abstract
In the work one can find the research of anizothermal eutectoid transformation of unalloyed austenitized spheroidal cast iron in the temperature 875 or 1000oC. By means of the matallographic method one prepered TTT diagrams. On the basis of the quantitative matallographic analysis the influence of austenitization temperature on the mechanism and kinetics of the eutectoid transformation was interpreted.
Authors and Affiliations
T. Szykowny, M. Trepczyńska – Łent
Keywords
Related Articles
- EP ID EP72146
- DOI -
- Views 120
- Downloads 0
Selected characteristic of silumins with additives of Ni, Cu, Cr, Mo, W and V
The study, presents an investigation results of new grades of silumins containing of: 7,0÷17,0% Si, 4,0% Ni, 4,0% Cu and 0,5% Cr, Mo, W each as well as V. The influence tests were carried out of - antimony addition, stro...
Structure of carbon steels after remelting of the surface layer with the electric arc
This study presents results of a research on the enhancement of properties of the surface layer of carbon steels by treating it with a concentrated heat stream utilizing the GTAW method. Remelting of the surface layer of...
Tribological resistance of high speed steel HS 6-5-2 remelted with electric arc
The intensity of tribological wear of the high speed steel HS 6-5-2 remelted with the GTAW method has been compared to the heat treatment steel in a conventional way. Moreover, the types of the wear appeared during the f...
Physicochemical preparation of the AlSi11 alloy for castings of fire-fighting equipment
The paper presents results of reaction kinetics investigation of crystallization processes of refined, modified with Sr and Sb as well as filtered silumin destined to casting of fire-fighting equipment. It has been deter...
Total productive maintenance on example of automated foundry lines
Within framework of the presented study one has performed analysis of stoppages in automatic foundry lines operation, and basing on assumptions from complex maintenance system has undertaken himself to develop a service...