Elements of the efficiency system improvement of foundry
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 2
Abstract
The effectiveness of industrial systems is being ranked among important factors industrial engineering in foundry. He determines internal production abilities of foundry. It is possible to describe the effectiveness the measure of matching closely possibilities maximum number of products for definite quality standards, at the optimal use of production factors and with the application the best methods pouring out. The second worship of article is devoted to problems market supply casting products. They discussed comprehensive you will eat a little of processes supplying.
Authors and Affiliations
J. Sitko
Keywords
Related Articles
- EP ID EP72214
- DOI -
- Views 113
- Downloads 0
Bainitic-martensitic nodular cast iron with carbides
In this paper the possibility obtaining of upper bainite, lower bainite and martensite or their mixture in nodular cast iron with carbides has been presented. Conditions have been given, when in nodular cast iron with ca...
Criteria of an Advanced Assessment of the Reclamation Process Products
Reclamation of spent moulding and core sands has been defined as a treatment of used moulding refractory materials, enabling a recovery of at least one of the components - of properties similar to the ones of the fresh c...
New Look at the Process of Reclamation of Moulding Sands
This paper presents a new perspective on the issue of reclamation of moulding and core sands. Taking as a premise that the reclamation process must remain on the surface of grains some not separated binding materials res...
Influence of cooling rate on the structure and mechanical properties of G17CrMoV5 – 10 cast steel
The paper presents results of research on the influence of cooling rate on the structure and properties of G17CrMoV5 – 10 (L17HMF) cast steel. The material for research was a section taken out from an outer cylinder of a...
Structural stability at elevated temperatures of the AlSi6Cu4 matrix composite with graphite particles
The results of investigation of structure stability of the AlSi6Cu4 matrix alloy and composites with graphite particles at elevated temperatures were presented. Composites and matrix alloy were prepared by squeeze castin...