THE INFLUENCE OF MACHINING PARAMETERS ON THE PLACE OF FORMATION AND INTENSITY OF THE WEAR PROCESS OF DRILLS
Journal Title: Tribologia - Year 2014, Vol 255, Issue 3
Abstract
To determine the wear of drills during their operation, at constant cutting parameters during the one approved tool life under the cut, a series of durability tests of drills made of HS2-5-1 were carried out. The study was conducted during the machining of holes on the samples made of cast iron ENGJS-500-7 with a hardness of 200 HB. Observations of the wear were carried out on all elements of the cutting part of the drill. The evaluation of the wear degree was performed according to the maximum line wear size on the analysed surfaces. The maximum level of the wear was observed on the tool flank at their intersection with the surface of the drill margin. The size of the tool flank wear decreases in the direction of the drill axis and has the shape of a triangle. The wear of the rake face was not observed. During the drill’s operation with different cutting parameters, a loss of their cutting ability occurs for different values of wear indicators.
Authors and Affiliations
Jan JAWORSKI, Rafał KLUZ, Tomasz TRZEPIECIŃSKI
Keywords
Related Articles
- EP ID EP263457
- DOI -
- Views 35
- Downloads 0
MECHANICAL AND TRIBOLOGICAL PROPERTIES OF OXIDE LAYERS OBTAINED ON Ti-6Al-7Nb ALLOY
The research presented in the paper was focused on determining the effects of thermal oxidation parameters on the mechanical and tribological properties of oxide layers formed on Ti-6Al-7Nb titanium alloy for biomedical...
THE INFLUENCE OF THE TYPE OF THICKENER ON TRIBOLOGICAL CHARACTERISTICS OF LUBRICATING GREASES
In this article, the authors present the results of investigations on the influence dispersed phase on the lubricating properties of selected lubricated compositions. For production plastic greases used to mineral oil ba...
POSSIBILITIES OF APPLICATION OF NEW MATERIALS FOR CHAIN DRUMS OF ARMOURED FACE CONVEYORS WITH AN INCREASED WEAR RESISTANCE
The primary purpose of this study was to carry out comparative research concerning the wear properties of materials used for chain drums, both of domestic and foreign production, as well as of ADI cast iron, which was co...
Sposób wyznaczania maksymalnego przyrostu temperatury w procesie tarcia metali
PORÓWNANIE ODPORNOŚCI NA ZUŻYWANIE ŚCIERNE STALI HARDOX 500 i 20MnCr5
W pracy przedstawiono wyniki badań eksperymentalnych dotyczących odporności na zużywanie ścierne stali Hardox 500 i stali 20MnCr5 poddanej obróbce cieplno-chemicznej. Stale te często stosuje się na elementy maszyn rolnic...