THE INFLUENCE OF SELECTIVE LASER SINTERING PARAMETERS ON TRIBOLOGICAL PROPERTIES OF PA 3200 GF POLYAMIDE
Journal Title: Tribologia - Year 2018, Vol 277, Issue 1
Abstract
The paper presents the preliminary results of tribological research on the material used in the selective laser sintering technology, SLS. The samples in the shape of rings were manufactured of PA 3200 GF polyamide powder additionally reinforced with glass fibre, which is based on pure PA 2200 polyamide. The tests were carried out on a tribological T-15 tester, ring-on-disc type imitating the cooperation conditions of elements, e.g., the rings of the contact active seal. The main objective of the research was to determine the influence of the direction of the positioning of the models on the construction platform on the coefficient of friction and the wear of the cooperating friction pair components.<br/><br/>
Authors and Affiliations
Czesław KUNDERA, Tomasz KOZIOR
Keywords
Related Articles
- EP ID EP346180
- DOI 10.5604/01.3001.0011.9856
- Views 28
- Downloads 0
RESEARCH OF WEAR OF RUBBER PLATES TO BE APPLIED AS A LINING MATERIAL IN MINES
The article presents the research results of the wear of rubber samples being applied as protective plates in mines. The samples were abraded by abrasive loose particles. The particles were both sliding and impacting the...
THE GREASE CONTENT IN COMPOSITE THERMOSETTING METAL-POLYMER
This paper presents the impact of the grease additive content in the metal– –polymer composite that improves the wear characteristics of the investigated composites. The investigated composite material was based on pheno...
INCREASING THE SERVICEABILITY OF FRICTION PAIRS BY APPLYING A:C:H AND A:C:H:W DLC COATINGS
The paper discusses the results of structural and tribological tests conducted for a:C:H and a:C:H:W DLC coatings deposited on Co- Cr-Mo specimens using the PACVD process. The structure and morphology of the Co-Cr-Mo sub...
STRESS IN CONTACT OF TEETH GEAR WITH COATED MATERIAL
Due to the increased interest amongst tooth gear manufacturers for an adequate method of stress field controlling, this paper presents an analysis of the applicability of Hertz theory to the case of contact of the elemen...
Mechanizm powstawania białej warstwy w kontekście zużycia narzędzi podczas kształtowania stalowych elementów konstrukcyjnych
Kształtowanie na gorąco lub ciepło elementów stalowych konstrukcyjnych stwarza warunki sprzyjające tworzeniu się na powierzchni narzędzi stalowych tzw. białej warstwy. Tworzenie się białej warstwy w wyniku procesów tribo...