The influence of surface pretreatment on the quality of plasma coatings
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
The paper presents research in the field of ceramic coatings. In the experiment, 5 types of ceramic coatings were applied to the base material by means of water-stabilized plasma, which was non-alloy quality structural steel S 235J2+N EN 10250-2-2000. The properties of surface treatment of the substrate by blasting on Al2O3, Al2O3 with interlayer Ni, Al2O3+5% Ni, Al2O3+12 % Ni, Al2O3+20 % Ni were analysed. The quality of the surfaces was evaluated according to EN ISO 4287, where the values Ra and Rz were monitored. The quality of the ceramic coatings was analysed by light and electron microscopy.
Authors and Affiliations
Ján Viňáš, Dagmar Draganovská, Yuriy Nykyforchyn, Ihor Okipnyi
Keywords
Related Articles
- EP ID EP373014
- DOI 10.33108/visnyk_tntu2018.02.005
- Views 58
- Downloads 0
Experimental researches of parameters technological process of the improved beets tops purifier
In this article, the problem of the need to improve existing and development of essentially new beet-harvesting machines is investigated since the existing ones do not fully satisfy the agronomic requirements for the pro...
Multiplex digital correlator with high priority deployment of one of the acoustic signal receivers
The article deals with theoretical foundations and design solutions for structure synthesis of devices for identification of Hemming spatial parameters of acoustic signals.Acoustic method for optimization of multiplex di...
Modification of drive roller chain link plates
The article deals with the problem of effect assessment on strain-stress state of drive roller chain link plates, their shapes and dimensions. It is noticed that decrease of strain concentration in plates cross-section d...
Computer modelling characteristics of ballast choke of the fluorescent lamp
Basing on the analysis of existing structures of the planar system induction coils authors proposed to fill the space between the turns of the coil by the ferromagnetic material. This design will increase the magnetic in...
Pressing of the preliminary-stressed plate by two co-axial punches of complex configuration
Solution of the contact task on the interrelation of the ring-parabolic and parabolic punch with the preliminary-stressed plate has been presented in the article. Development of analytical solutions for the plate is perf...